GIGABYTE
GIGABYTE GP-P650G 650 W power supply
ATX 650 W unit with 80 Plus Gold efficiency, Japanese capacitors, 120 mm hydraulic-bearing fan and full protection suite
- TypeATX12V
- Maximum Power650 W
- Fans120mm Hydraulic Bearing (HYB)Fan
- PFCActive
- Main Connector20+4Pin
- PCI-Express Connector4 x 6+2-Pin
- 80 Plus Gold certification cuts energy waste
- Japanese capacitors extend unit lifespan
- Hydraulic bearing fan adjusts speed for quiet running
- Single +12 V rail delivers full 650 W
- Compact 150 mm depth fits smaller cases
650 W ATX power supply for mid-range builds
The GIGABYTE GP-P650G delivers 650 W of continuous power through a single +12 V rail. It carries 80 PLUS Gold certification and uses Japanese capacitors for stable output. A 120 mm hydraulic bearing fan adjusts speed based on load and temperature. The unit measures 150 mm deep and fits standard ATX cases.
Replaces older bronze
The Gold rating reduces waste heat compared with lower-tier supplies. Flat black cables simplify routing and improve airflow inside the chassis. Full protection suite including OVP, OPP, SCP, UVP, OCP and OTP safeguards components during irregular conditions. The upgrade is worthwhile when a build demands cleaner power and quieter operation.
Handles a modern CPU plus one high-end graphics card
Four 6+2-pin PCIe connectors support a single GPU with dual or triple power inputs. Six SATA connectors provide headroom for multiple drives and peripherals. The 150 mm length leaves room in compact enclosures. It runs out of headroom with dual-card configurations or extreme overclocking loads.
Points forts
- 80 Plus Gold certification cuts energy waste
- Japanese capacitors extend unit lifespan
- Hydraulic bearing fan adjusts speed for quiet running
- Single +12 V rail delivers full 650 W
- Compact 150 mm depth fits smaller cases
Caractéristiques
| Brand | GIGABYTE |
|---|---|
| Model | GP-P650G |
| Type | ATX12V |
| Maximum Power | 650 W |
| Fans | 120mm Hydraulic Bearing (HYB)Fan |
| PFC | Active |
| Main Connector | 20+4Pin |
| PCI-Express Connector | 4 x 6+2-Pin |
| SATA Power Connector | 6 |
| Max PSU Length | 150 mm |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Protection | OPP/UVP/OVP/SCP/OCP |
| Input Voltage | 100-240 Vac (full range) |
| Input Frequency Range | 50/60 Hz |
| Input Current | 9-4A |
| MTBF | >100,000 Hours |
| Approvals | CE/CCC/BSMI/KCC/EAC/UL/TUV/RCM/FCC |
| Connectors | ATX/MB 20+4 Pin x 1 CPU/EPS 4+4 Pin x 1 PCI-e 6+2 Pin x 4 SATA x 6 4 Pin Peripheral x 3 4 Pin Floppy x 1 |
| Cable Spec | Black Flat Cables |
| Dimensions | 150*140*86 mm |
| Poids d’expédition | 2.13 kg |
| Dimensions du colis | 254 × 203 × 121 mm |
Questions sur cet article
How much clearance does the 150 mm length need in my case?
The unit is 150 mm long, 140 mm wide and 86 mm tall, so your case must provide at least that much depth and height for the ATX power supply bay.
Which cables must I connect during installation, and which step is often missed?
Attach the 20+4 pin motherboard cable, the 4+4 pin CPU cable, the four 6+2 pin PCIe cables, six SATA cables, three peripheral cables and the floppy cable; the CPU 4+4 pin connector is the one most builders forget.
When will the 120 mm hydraulic bearing fan need replacement?
The fan is rated for over 100,000 hours of operation, so under normal use it should not require replacement for many years.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



