Goldshell
Goldshell LB-Box 175GH/s LBC 162W 35dB PSU mining hardware
Compact LBC miner delivering 175 GH/s at 162 W with 35 dB noise and an included 750 W PSU
- Delivers 175 GH/s hashrate for LBRY mining
- Consumes only 162 W wall power for efficient operation
- Runs at 35 dB for quiet home placement
- Compact 178×150×84 mm chassis fits small spaces
- Includes 750 W PSU capable of powering two miners
Compact LBC Miner with 175 GH/s
The Goldshell LB-Box targets home miners who want a ready-to-run LBRY Credits device. It delivers a rated 175 GH/s while drawing 162 W from the wall. A 750 W power supply is included in the box and can support two of these units. The miner connects to the network through a single Ethernet port.
Small Enclosure and Included Power
The chassis measures 178 mm by 150 mm by 84 mm and weighs 2 kg, so it fits on a desk or shelf without special mounting hardware. The bundled 750 W PSU removes the need to source a separate supply and leaves headroom for a second miner. Only an Ethernet cable and a mains socket are required to start hashing.
Low Noise and Modest Heat
Rated acoustic output is 35 dB, which is comparable to a quiet office and suits residential spaces. The unit is specified for ambient temperatures from 0 to 35 °C, so normal room conditions are within range. At 162 W the thermal load is modest and the compact form factor dissipates it without loud fans.
Points forts
- Delivers 175 GH/s hashrate for LBRY mining
- Consumes only 162 W wall power for efficient operation
- Runs at 35 dB for quiet home placement
- Compact 178×150×84 mm chassis fits small spaces
- Includes 750 W PSU capable of powering two miners
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
What Ethernet interface does the LB-Box use and what throughput does it cap at?
The LB-Box connects via a standard Ethernet port; the 175 GH/s hashrate and 162 W power draw are the practical limits of the unit, not the network link.
What clearance do the 178 mm by 150 mm by 84 mm dimensions and 2 kg weight require for shelf or rack mounting?
Allow at least 178 mm depth, 150 mm width and 84 mm height plus a few centimetres airflow space; the 2 kg weight needs a shelf rated for at least 3 kg.
How is the included 750 W PSU wired to the miner, and what step do builders often miss?
Plug the PSU’s DC output into the miner’s power inlet, then connect the PSU to mains with the supplied cord; the step often missed is seating the DC connector fully until it clicks.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



