HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7180 RAID controller PCIe 3.0 x16 8x U.2 NVMe
Low-profile PCIe 3.0 x16 card adds eight U.2 NVMe channels with RAID 0, 1, 10 and single-disk modes supporting over 120TB capacity
- Form FactorLow Profile
- TypeU.2
- Internal Connectors8 x Intenal U.2 NVMe port (SFF-8643)
- InterfacePCI-Express 3.0 x16
- Transfer Rate8GT per lane / 8Gbps per lane
- RAIDSingle, RAID 0, 1, 1/0
- Sustained write throughput exceeding 14000 MB/s via PCIe 3.0 x16 bandwidth
- Eight U.2 NVMe channels supporting over 120TB total storage capacity
- RAID 0, 1, 10 and single-disk modes for flexible data protection
- Works with Windows, Linux and macOS on AMD or Intel platforms
- Low-profile form factor with modular cooling for dense server deployments
Eight-channel U.2 NVMe RAID controller
The HighPoint SSD7180 is a low-profile PCIe 3.0 x16 add-in card that provides eight internal SFF-8643 connectors for U.2 NVMe drives. It supports single-disk, RAID 0, RAID 1 and RAID 10 modes with high-sustained write performance. The card works with Windows 10, Windows Server 2016 or later, Linux kernel 3.10 or later and macOS 10.13 or later.
Builders needing massive NVMe capacity on a single
This controller suits workstations and servers that must saturate a PCIe 3.0 x16 link with up to 120 TB of U.2 storage. It is not for systems limited to PCIe x8 or x4 slots, nor for buyers who require RAID 5 or RAID 6 parity protection.
PCIe 3.0 x16 host interface
The card requires a full x16 electrical connection to deliver its rated 14,000 MB/s sustained write bandwidth across eight U.2 channels. A slot wired for fewer lanes will limit throughput and may prevent the controller from initialising.
Points forts
- Sustained write throughput exceeding 14000 MB/s via PCIe 3.0 x16 bandwidth
- Eight U.2 NVMe channels supporting over 120TB total storage capacity
- RAID 0, 1, 10 and single-disk modes for flexible data protection
- Works with Windows, Linux and macOS on AMD or Intel platforms
- Low-profile form factor with modular cooling for dense server deployments
Caractéristiques
| Brand | HighPoint |
|---|---|
| Model | SSD7180 |
| Form Factor | Low Profile |
| Type | U.2 |
| Internal Connectors | 8 x Intenal U.2 NVMe port (SFF-8643) |
| Interface | PCI-Express 3.0 x16 |
| Transfer Rate | 8GT per lane / 8Gbps per lane |
| RAID | Single, RAID 0, 1, 1/0 |
| Operating Systems Supported | Windows 10, Windows Server 2016 or later, Linux Kernel 3.10 or later, macOS 10.13 or later |
| Features | High-sustained write performance PCIe 3.0 x16 8x U.2 NVMe Channels (SFF-8643) support over 120TB of storage capacity Certified Cable Accessories: 8643-8639-50, 8643-8643-0350, 8643-8643-060, OLX4-8643-061 Truly Platform Independent NVMe RAID Solutions for AMD & Intel motherboards with PCIe 3.0/4.0 x16 slots Comprehensive RAID Storage Solution: RAID 0, 1, 10 and Single (single-disk) Supports all major operating system platforms: Windows, macOS, Linux Flexible, Modular Cooling solution Note: Only HighPoint Certified cables and enclosures can be used with our storage products and soluti |
| Poids d’expédition | 0.42 kg |
| Dimensions du colis | 338 × 193 × 64 mm |
Questions sur cet article
What motherboard slot is required for the SSD7180 to operate at PCIe 3.0 x16?
The SSD7180 needs a PCIe 3.0 or 4.0 x16 slot on an AMD or Intel motherboard to deliver full bandwidth.
Can the SSD7180's eight U.2 channels use existing SFF-8643 cables?
Yes, the eight internal U.2 ports use SFF-8643 connectors and work with certified cables such as 8643-8643-0350 or 8643-8643-060.
How can I verify the SSD7180 is sustaining write speeds above 14000 MB/s after setup?
Run a sustained write benchmark across the configured RAID 0 or RAID 10 array and confirm throughput exceeds 14000 MB/s.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Lenovo
Lenovo 4XB0F28690 ThinkServer RAID 110i RAID 5 Upgrade Key
66,99 $US73,99 $US−9%
0.00084984BTC
En stock
