HP
HP HSTNS-PL53 550W power supply
Delivers 550 W at 12 V for compatible Proliant Gen9 servers, accepting 100-240 V input at 3.3 A
- TypePower Supply
- 550 W output powers ProLiant Gen9 servers
- 12 V rail delivers 45.8 A for stable loads
- 100–240 V input works worldwide at 50–60 Hz
- 3 A draw keeps circuit loading low
- Hot-plug design fits DL60, DL80, DL120, DL160, DL180
HP ProLiant Gen9 550W supply
This HP HSTNS-PL53 unit delivers 550W at 12V for ProLiant Gen9 servers such as the DL180, DL160, DL120, DL80 and DL60. It accepts 100-240V input at 50-60Hz and draws 3.3A, providing 45.8A on the 12V rail. The PS-2551-2C-LF design matches part numbers 748949-001, 766879-001 and 765423-201.
Hot-plug redundant slot fit
The supply slides into the standard hot-plug bay on supported Gen9 chassis, letting you replace it without shutting down the server. Redundant pairing frees uptime for critical workloads while the common 12V output simplifies cabling inside the rack. No extra adapters are required for the listed models.
Included part-number labels
Each unit ships with the HP part-number labels 748949-001, 766879-001 and 765423-201 already applied, so asset tracking and warranty registration match vendor records immediately. The labels remove guesswork during inventory audits and speed up support calls. No separate software or firmware bundle is supplied.
Points forts
- 550 W output powers ProLiant Gen9 servers
- 12 V rail delivers 45.8 A for stable loads
- 100–240 V input works worldwide at 50–60 Hz
- 3 A draw keeps circuit loading low
- Hot-plug design fits DL60, DL80, DL120, DL160, DL180
Caractéristiques
| Brand | HP |
|---|---|
| Series | Proliant |
| Model | HSTNS-PL53, PS-2551-2C-LF |
| Type | Power Supply |
Questions sur cet article
Will the 550W rating hold during continuous load on the 12V rail?
The unit delivers 550W total with a 12V output rated at 45.8A, so the full wattage is available on that single rail under sustained use.
How loud and hot does the supply get when running 24/7 in a Proliant Gen9 chassis?
The PSU uses the server’s managed fan wall; noise and exhaust temperature follow the system’s thermal profile rather than an internal fan curve.
Which HP server models accept the HSTNS-PL53 without extra brackets or cables?
It fits Proliant Gen9 DL60, DL80, DL120, DL160 and DL180 directly, using the native hot-plug slot and backplane connector.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



