HP
HP ProLiant DL380 Gen10 10 Bay 48-Core 2x Xeon Platinum 8160 2.1GHz 512GB DDR4 2x 1TB SATA 8x 1.2TB SAS
Ten-bay rackmount server with dual Xeon Platinum 8160 CPUs, 48 cores, 512GB DDR4, and mixed SATA SSD plus SAS HDD storage
- TypeRackmount
- LEDsPower, Ethernet, USB
- CPU TypePlatinum 8160
- CPU Speed2.10GHz
- Number of CPU Cores24
- # of Processors Installed2
- 48 cores from dual Xeon Platinum 8160 CPUs run demanding workloads
- 512 GB DDR4 memory supports many virtual machines simultaneously
- 10 drive bays hold 2 x 1 TB SATA SSD plus 8 x 1.2 TB SAS HDD
- P816i-a controller simplifies array setup and daily management
- 2U rackmount design fits standard data-centre cabinets
HP ProLiant DL380 Gen10 10-bay 48-core server
This HP ProLiant DL380 Gen10 is a 2U rackmount server system built for business workloads. It runs dual Intel Xeon Platinum 8160 processors at 2.10GHz, delivering 48 cores total. Installed memory is 512GB DDR4, supporting up to 3TB maximum capacity. Storage combines two 1TB SATA SSDs with eight 1.2TB SAS drives across ten 2.5-inch bays, managed by a P816i-a controller.
Suited for virtualization.
The configuration suits organisations running virtual machines, databases, file storage or application hosting that benefit from high core counts and large memory. Integrated graphics and a 60-unit weight suit standard rack deployments. Buyers needing GPU acceleration, more than two sockets, or drive bays beyond the ten 2.5-inch slots should evaluate other platforms.
512GB DDR4 installed memory with 3TB maximum
The single specification that decides fit is the 512GB DDR4 memory installed across the system, expandable to a 3TB ceiling. This capacity determines how many concurrent virtual machines, databases or data-heavy services the server can support without swapping. Confirm your workload fits within this memory envelope before purchase.
Points forts
- 48 cores from dual Xeon Platinum 8160 CPUs run demanding workloads
- 512 GB DDR4 memory supports many virtual machines simultaneously
- 10 drive bays hold 2 x 1 TB SATA SSD plus 8 x 1.2 TB SAS HDD
- P816i-a controller simplifies array setup and daily management
- 2U rackmount design fits standard data-centre cabinets
Caractéristiques
| Brand | HP |
|---|---|
| Type | Rackmount |
| LEDs | Power, Ethernet, USB |
| CPU Type | Platinum 8160 |
| CPU Speed | 2.10GHz |
| Number of CPU Cores | 24 |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| GPU Type | Integrated |
| Expansion Bays | 10B - 10x 2.5" |
| Operating System | No |
| Weight | 60 |
Questions sur cet article
What rack depth is required to mount the 10-bay 2.5-inch chassis?
The server is a rackmount unit with ten 2.5-inch bays; verify your rack provides enough depth for the chassis and rear cable management.
How are the two Xeon Platinum 8160 processors and the P816i-a controller installed during initial setup?
Technicians configure the BIOS, set up the P816i-a storage controller, build the RAID array, update drivers and install the operating system before the system ships.
Which drive types will need replacement when the 1.2 TB SAS HDDs or 1 TB SATA SSDs reach end of life?
The system uses eight 1.2 TB SAS hard drives and two 1 TB SATA solid-state drives; replace failed units with the same SAS or SATA 2.5-inch form factor.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
52,99 $US67,99 $US−22%
0.00067503BTC
En stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
1 267,99 $US
0.01615274BTC
En stock