HPE
HPE 805383-001 1.60 TB SATA 2.5" internal hard drive
A 1.60 TB SATA solid-state drive in a 2.5-inch hot-plug carrier for mixed-use server workloads
- 60 TB capacity supports mixed-use server workloads
- SATA 600 interface delivers consistent data throughput
- 5 inch form factor fits dense server bays
- Hot-pluggable carrier enables drive swaps without downtime
- Compatible with HPE ProLiant DL and BL Gen9/Gen10 servers
1.6 TB mixed-use SATA SSD
This HPE 805383-001 solid-state drive provides 1.60 TB of storage for servers that need balanced read and write endurance. It uses a SATA 600 interface and a 2.5-inch form factor with an included carrier. The drive is built for hot-plug insertion in supported HP ProLiant Gen9 and Gen10 platforms.
Sustained mixed-use workload behaviour
Rated for mixed use, the drive maintains consistent throughput during combined read and write activity rather than optimising for burst speed. Endurance is tuned for workloads such as databases, virtualization and transactional applications. No wireless LAN capability is present.
Hot-plug installation with carrier
The supplied carrier allows tool-less insertion into compatible drive bays while the server remains powered on. Compatibility is limited to the listed HP DL120, DL180, DL360, ZDL180 and BL460c models. Builders using non-HPE chassis or unsupported generations will not be able to install this drive.
Points forts
- 60 TB capacity supports mixed-use server workloads
- SATA 600 interface delivers consistent data throughput
- 5 inch form factor fits dense server bays
- Hot-pluggable carrier enables drive swaps without downtime
- Compatible with HPE ProLiant DL and BL Gen9/Gen10 servers
Caractéristiques
| Brand | HPE |
|---|
Questions sur cet article
Does the 1.60 TB SATA/600 SSD generate much heat or noise when running continuously in a server?
The solid-state design has no moving parts, so it runs silently and produces less heat than a mechanical drive under sustained mixed-use workloads.
What server-side hardware is required to hot-plug this 2.5" SATA drive?
A compatible HPE Gen9 or Gen10 server bay with a SATA backplane and hot-plug carrier support is needed; the drive ships with its own carrier.
Will this 1.60 TB mixed-use SSD work alongside older 3.5" mechanical drives in the same HPE DL180 Gen9 chassis?
Yes, the 2.5" form factor fits the SFF bays in DL180 Gen9 8SFF models while 3.5" drives occupy the LFF bays, sharing the same SATA/600 backplane.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
