HPE
HPE BL460c G10 blade server 2x Xeon Gold 6136 64GB 2x 4TB SATA
A dual-processor blade server with two Xeon Gold 6136 CPUs, 64 GB DDR4 memory and two 4 TB SATA drives
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed3 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size64GB
- Dual Xeon Gold 6136 processors deliver 24 cores at 3.0 GHz for parallel workloads
- 64 GB DDR4 ECC registered memory supports large datasets with room to expand to 128 GB
- Two 4 TB SATA 2.5" drives provide 8 TB raw capacity on a Smart Array P204i-b SR controller
- Integrated iLO Advanced remote management enables out-of-band control and firmware updates
- FlexFabric 20 Gb 2-port 650FLB adapter supplies high-throughput networking for blade environments
HPE BL460c Gen10 blade with dual Xeon Gold 6136
The HPE BL460c Gen10 is a half-height blade server populated with two Intel Xeon Gold 6136 processors running at 3.0 GHz. It ships with 64 GB of DDR4 ECC registered memory and two 4 TB SATA 2.5-inch hard drives managed by a Smart Array P204i-b SR Gen10 controller. Integrated Lights-Out Advanced and a FlexFabric 20 Gb 2-port 650FLB adapter provide remote management and networking.
Suited for dense compute clusters.
This configuration fits environments that run virtualised workloads or high-performance applications inside a c-Class enclosure where compute density matters. Buyers who need more than two internal drive bays, additional PCIe expansion or GPU acceleration should look at a different platform because the blade supports a maximum of two 2.5-inch drives and has no mezzanine cards installed.
Two-drive SATA limit defines storage capacity
The single specification that determines fit is the two-drive SATA constraint: only two 2.5-inch SATA bays are available and both are occupied by the 4 TB drives supplied. Any requirement for additional local storage cannot be met by this blade.
Points forts
- Dual Xeon Gold 6136 processors deliver 24 cores at 3.0 GHz for parallel workloads
- 64 GB DDR4 ECC registered memory supports large datasets with room to expand to 128 GB
- Two 4 TB SATA 2.5" drives provide 8 TB raw capacity on a Smart Array P204i-b SR controller
- Integrated iLO Advanced remote management enables out-of-band control and firmware updates
- FlexFabric 20 Gb 2-port 650FLB adapter supplies high-throughput networking for blade environments
Caractéristiques
| Brand | HP |
|---|---|
| Series | Proliant BL |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 3 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 128GB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | HP Smart Array P204i-b SR Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | Integrated Lights-Out (iLO) Advanced |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions sur cet article
How much additional DDR4 memory can be added before reaching the 128GB maximum?
The board holds 64GB now and supports up to 128GB, leaving room for another 64GB of DDR4 ECC registered modules.
Which component hits its ceiling first when both Xeon Gold 6136 processors run at 3.0 GHz continuously?
The two installed CPUs are already the maximum of two, so compute capacity is fixed; sustained loads are limited by the 64GB memory ceiling and the dual 4TB SATA drive throughput.
What is the typical power draw and acoustic profile when the blade runs 24/7 inside its enclosure?
Dual 12-core Gold 6136 chips, 64GB DDR4, two 4TB SATA drives and the Smart Array P204i-b SR controller draw steady power; the enclosure fans scale with inlet temperature to keep the blade within thermal limits.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
