HPE
HPE BL460c G10 Blade Server 2x Xeon Gold 6148 128GB DDR4 2x 4TB SATA
Dual 2.4 GHz Xeon Gold 6148 processors with 10 cores each, 128 GB DDR4 and two 4 TB SATA drives in a 2.5 inch blade form factor
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed2.4 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size128GB
- Dual Xeon Gold 6148 processors deliver 20 cores at 2.4 GHz for heavy workloads
- 128 GB DDR4 ECC registered memory supports large datasets and virtualization
- Two 4 TB SATA 2.5" drives provide 8 TB raw capacity for bulk storage
- Smart Array P204i-b SR controller enables hardware RAID for data protection
- Integrated iLO Advanced remote management allows full out-of-band server control
Blade density and dual-CPU capacity
The HPE BL460c G10 is a half-height blade server fitted with two Xeon Gold 6148 processors running at 2.4 GHz. Each CPU provides 10 cores and 27.5 MB of cache for a total of 20 cores in a single slot. The system ships with 128 GB of DDR4 ECC registered memory, reaching the maximum supported capacity. Two 4 TB SATA 2.5-inch hard drives are installed behind the Smart Array P204i-b SR Gen10 controller.
SATA throughput and two-drive limit
Storage connects through a SATA interface on the integrated Smart Array P204i-b SR Gen10 controller, which caps sequential throughput to the SATA 6 Gb/s line rate. The blade chassis accommodates only two 2.5-inch drives, so total raw capacity is fixed at 8 TB unless drives are replaced with higher-density SATA models. The FLEXFABRIC 20 GB 2-port 650FLB adapter handles network traffic, but storage bandwidth remains bound by the SATA link and the two-bay physical constraint.
Blade-slot insertion and firmware alignment
Installation consists of sliding the blade into a compatible c-Class enclosure bay and securing the latch; no cable routing inside the blade is required. The most common issue is a firmware mismatch between the blade iLO Advanced, the Smart Array controller and the enclosure OA, which can prevent the server from posting. All units ship with BIOS, iLO and controller firmware updated to the latest stable versions to reduce that risk. Remote management via iLO Advanced allows headless configuration once the blade is powered.
Points forts
- Dual Xeon Gold 6148 processors deliver 20 cores at 2.4 GHz for heavy workloads
- 128 GB DDR4 ECC registered memory supports large datasets and virtualization
- Two 4 TB SATA 2.5" drives provide 8 TB raw capacity for bulk storage
- Smart Array P204i-b SR controller enables hardware RAID for data protection
- Integrated iLO Advanced remote management allows full out-of-band server control
Caractéristiques
| Brand | HP |
|---|---|
| Series | Proliant BL |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 128GB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | HP Smart Array P204i-b SR Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | Integrated Lights-Out (iLO) Advanced |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions sur cet article
Should I pick the 128GB DDR4 configuration or add more memory later?
The board holds 128GB maximum and both sockets are already populated with DDR4 ECC Registered modules, so no further expansion is possible.
What does the 2.4 GHz Xeon Gold 6148 rating mean for actual workloads?
Each of the two processors runs ten cores at 2.4 GHz with 27.5 MB cache, giving 20 cores total for parallel tasks such as virtualization or database work.
How does the SATA interface on the Smart Array P204i-b SR controller affect the two 4TB drives?
The controller presents the 2.5" SATA drives to the OS and handles RAID 0 or 1, limiting throughput to the SATA link speed of the installed hard disks.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
