HPE
HPE DL360 Gen10 8SFF 2x Xeon Bronze 3106 512GB DDR4 rack server
Dual 1.7GHz Xeon Bronze 3106 processors with 512GB DDR4 memory and Smart Array P408 controller in an 8-bay 2.5in rack chassis
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.7GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon Bronze 3106 processors provide eight cores each for multi-threaded workloads
- 512 GB DDR4 ECC registered memory supports large data sets and virtualization
- Eight 2.5-inch drive bays with Smart Array P408 SAS controller enable flexible storage configuration
- Dual 500 W Flex Slot power supplies and iLO Advanced remote management ensure uptime and remote control
- Intel I350 and X540 network adapters deliver two 10 GbE and two 1 GbE ports for high-throughput connectivity
Dense compute node with dual Xeon 3106 and 512GB
The HPE DL360 Gen10 fits 2 processors and 512GB of DDR4 into a 1U rack chassis with eight 2.5-inch drive bays. Two Xeon Bronze 3106 CPUs run at 1.7GHz and the Smart Array P408 controller handles SAS or SATA drives. Integrated graphics and iLO Advanced remote management are included.
Suited for virtualisation hosts needing high
Buyers who require GPU acceleration should look elsewhere because only integrated graphics are present. Organisations that need more than two sockets or memory beyond 3TB will need a larger platform. The configuration ships without drives so storage must be sourced separately.
512GB DDR4 registered ECC installed across 24 slots
This capacity is the decisive figure for consolidation workloads. The system supports up to 3TB total when all slots are populated with larger modules. Memory type is fixed at DDR4 so any upgrade must match that generation.
Points forts
- Dual Xeon Bronze 3106 processors provide eight cores each for multi-threaded workloads
- 512 GB DDR4 ECC registered memory supports large data sets and virtualization
- Eight 2.5-inch drive bays with Smart Array P408 SAS controller enable flexible storage configuration
- Dual 500 W Flex Slot power supplies and iLO Advanced remote management ensure uptime and remote control
- Intel I350 and X540 network adapters deliver two 10 GbE and two 1 GbE ports for high-throughput connectivity
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.7GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 4,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the 2.5 inch drives into the 8SFF bays and what step is often missed?
Slide each drive into a bay until the latch clicks, then verify the Smart Array P408 controller detects every drive in the BIOS before configuring RAID.
What maintenance will the 512GB DDR4 memory require over time?
DDR4 ECC registered modules are solid state and need no scheduled replacement; run the built-in memory test during firmware updates to catch correctable errors early.
Which limit appears first when both Xeon Bronze 3106 processors run at 1.7GHz under sustained load?
The 500W Flex Slot power supplies set the thermal and power ceiling before the 11MB L3 cache or memory bandwidth become bottlenecks.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



