HPE
HPE DL360 Gen10 8SFF 2x Xeon Silver 4210 2.2GHz 384GB DDR4 No Drive rack server
Dual Xeon Silver 4210 processors, 384GB DDR4 memory, eight 2.5-inch bays with P408 SAS controller and iLO Advanced remote management
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon Silver 4210 CPUs provide 10 cores each at 2.2 GHz
- 384 GB DDR4 ECC memory supports large virtualisation workloads
- Smart Array P408 SAS controller manages up to eight 2.5" drive bays
- HPE iLO Advanced enables full remote server management
- Redundant 500 W power supplies maintain uptime during failures
Ready-to-Deploy Rack Server
The HPE DL360 Gen10 arrives as a configured 1U rackmount system with dual Xeon Silver 4210 processors at 2.2 GHz and 384 GB of DDR4 ECC registered memory. No drives are installed, so storage can be matched to the workload.
Suited For Virtualisation And Database Hosts
Organisations needing dense compute and large memory capacity in a single rack unit will find the 10-core CPUs and 3 TB maximum memory ceiling appropriate. Buyers who require internal drives, GPU acceleration, or a different processor generation should look at alternative configurations.
384 GB DDR4 Installed Memory
The system ships with 384 GB of DDR4 ECC registered RAM across the available DIMM slots. This capacity determines whether the server can hold the working set for intended applications before any memory expansion is considered.
Points forts
- Dual Xeon Silver 4210 CPUs provide 10 cores each at 2.2 GHz
- 384 GB DDR4 ECC memory supports large virtualisation workloads
- Smart Array P408 SAS controller manages up to eight 2.5" drive bays
- HPE iLO Advanced enables full remote server management
- Redundant 500 W power supplies maintain uptime during failures
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Which drive caddies or backplane do I need to populate the 8 SFF bays?
The chassis supports up to eight 2.5-inch drives and uses the installed Smart Array P408 SAS controller with SATA interface; matching HPE SFF caddies are required for each bay.
Will my existing DDR4 ECC registered modules work with the two Xeon Silver 4210 processors already installed?
Yes, the system runs 384 GB of DDR4 ECC registered memory across both CPUs; any additional modules must be DDR4 ECC registered to be compatible.
How can I confirm the iLO Advanced remote management is active after first power-on?
Connect the dedicated iLO network port, browse to its IP address, and verify the firmware version shown matches the latest stable release applied before shipment.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
