HPE
HPE DL360 Gen9 8SFF 2x Xeon E5-2699v4 512GB DDR4 rack server
Dual 22-core Xeon E5-2699 v4 processors and 512 GB DDR4 memory in an 8-bay 2.5" rack chassis with P440 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual 22-core Xeon processors deliver 44 threads for heavy workloads
- 512 GB DDR4 ECC memory supports large virtualisation clusters
- Eight 2.5-inch SAS bays with P440 controller enable flexible storage arrays
- iLO Advanced remote management allows full out-of-band control
- 2× 500 W redundant power supplies keep the system running during a failure
Dual Xeon E5-2699 v4 with 512 GB DDR4
The HPE DL360 Gen9 rack server arrives with two Intel Xeon E5-2699 v4 processors running at 2.2 GHz, each providing 22 cores and 55 MB cache. 512 GB of DDR4 ECC registered memory is installed across the 24 DIMM slots, leaving headroom up to the 768 GB maximum. A P440 SAS RAID controller and dual 500 W flex-slot power supplies are fitted. HPE iLO Advanced remote management is included.
Suited for dense virtualisation
The 44 combined cores and large memory footprint serve environments that run many simultaneous virtual machines or in-memory databases. The 8 SFF drive bays accept 2.5-inch SAS media for high-IOPS arrays. Buyers who need GPU acceleration or fibre-channel connectivity should look elsewhere because the chassis provides only integrated graphics and standard Ethernet ports.
512 GB DDR4 ECC registered memory installed
The system ships with 512 GB of DDR4 ECC registered RAM already populated, which is the single specification that determines whether the server matches the workload's memory requirement. Expanding to the 768 GB ceiling requires adding compatible DDR4 modules.
Points forts
- Dual 22-core Xeon processors deliver 44 threads for heavy workloads
- 512 GB DDR4 ECC memory supports large virtualisation clusters
- Eight 2.5-inch SAS bays with P440 controller enable flexible storage arrays
- iLO Advanced remote management allows full out-of-band control
- 2× 500 W redundant power supplies keep the system running during a failure
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 9,60 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the Xeon E5-2699 v4 processors and what step is often missed?
The two processors are already installed in the dual-socket motherboard; the step people miss is applying the correct torque to the heatsink retention screws in a diagonal pattern so the 22-core dies make even contact.
What maintenance will the 512GB DDR4 memory need later?
The DDR4 ECC registered modules are sealed and require no periodic service; only a DIMM failure would require replacement, and the chassis supports up to 768GB total capacity.
What limit appears first during sustained use of the P440 SAS controller?
The P440 PCIe SAS controller and dual 500W power supplies set the thermal and power ceiling; under continuous heavy I/O the system will throttle before the 22-core CPUs reach their maximum frequency.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



