HPE
HPE DL380 Gen9 24SFF 1x Xeon E5-2640 v3 192GB DDR4 rack server
24-bay 2.5-inch rack server with one Xeon E5-2640 v3 at 2.6GHz, 192GB DDR4, P440ar SAS controller and dual 800W power supplies
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size192GB
- 24 SFF bays give dense storage capacity
- 192 GB DDR4 ECC memory handles large workloads
- 8-core Xeon E5-2640 v3 at 2.6 GHz delivers strong compute
- Dual 800 W hot-plug supplies provide power redundancy
- iLO Advanced remote management enables lights-out control
24-bay rack server for virtualisation clusters
The HPE DL380 Gen9 chassis holds up to 24 small-form-factor drives and ships with one Xeon E5-2640 v3 processor running at 2.6 GHz. With 192 GB of DDR4 ECC registered memory installed, the system is ready for memory-intensive workloads such as virtualisation hosts or database nodes. A second processor socket remains open for future expansion.
Sustained load behaviour with single processor
Under continuous demand the eight-core Xeon maintains its 2.6 GHz base frequency across all cores, while the P440ar SAS controller manages steady I/O to the drive bays. The integrated Intel I350 and X540 network adapters deliver 2 x 10 GbE plus 2 x 1 GbE throughput without throttling during prolonged traffic. Memory bandwidth scales linearly with the installed DDR4 modules.
Thermals noise and dual 800 W supplies
Dual hot-plug 800 W Flex Slot power supplies share the load, keeping each unit in its high-efficiency range during normal operation. The 2U chassis airflow design moves air front-to-rear, so inlet temperatures stay within spec even when all 24 bays are populated. Acoustic output remains at typical rack-server levels for a 2U form factor.
Points forts
- 24 SFF bays give dense storage capacity
- 192 GB DDR4 ECC memory handles large workloads
- 8-core Xeon E5-2640 v3 at 2.6 GHz delivers strong compute
- Dual 800 W hot-plug supplies provide power redundancy
- iLO Advanced remote management enables lights-out control
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 192GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 4,00 |
| Storage Controller | HP Smart Array P440ar And Sas Expander |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How much heat and power should I expect from the 2x 800W Flex Slot supplies running the Xeon E5-2640 v3 at 2.6GHz all day?
The server ships with two 800W hot-plug Flex Slot power supplies; the single Xeon E5-2640 v3 draws a base 2.6GHz across 8 cores, so sustained load stays within the 800W redundant pair without tripping overload protection.
Which drive trays and caddies must I already own to populate the 24SFF 2.5" bays served by the P440ar SAS controller?
The 24SFF chassis uses HP 2.5" SFF drive trays that mate directly to the P440ar SAS expander; without those trays the SATA or SAS drives cannot seat in the backplane.
Will the integrated Intel I350/X540 2x 10GbE + 2x 1GbE card work in a legacy PCIe 2.0 rack switch I still run?
The installed Intel I350/X540 network card negotiates down to PCIe 2.0 speeds, so the 2x 10GbE and 2x 1GbE ports remain functional on older switches, albeit at the lower bus throughput.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
52,99 $US67,99 $US−22%
0.00067997BTC
En stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
1 267,99 $US
0.01627088BTC
En stock