HPE
HPE DL380 Gen9 4LFF 2x Xeon E5-2670 v3 384GB DDR4 rack server
A 2U rack server holding up to four 3.5-inch drives, powered by two 12-core Xeon processors at 2.3 GHz with 384 GB of DDR4 memory and a P440 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.3GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual 12-core Xeon 2670 v3 processors deliver 24 threads at 2.3GHz
- 384GB DDR4 ECC registered memory supports large virtualisation workloads
- Four 3.5-inch LFF drive bays with P440 SAS controller enable flexible storage arrays
- HPE iLO Advanced remote management provides out-of-band server control
- Redundant 500W Flex Slot power supplies maintain uptime during power events
HPE DL380 Gen9 4LFF dual Xeon server
The HPE DL380 Gen9 4LFF chassis arrives with two Xeon E5-2670 v3 processors at 2.3GHz and 384GB of DDR4 ECC registered memory. A P440 SAS controller and dual 500W power supplies are installed, while drive bays remain empty for custom storage. BIOS and firmware are updated to the latest stable release before shipment.
Suits teams that need dense memory
Organisations requiring GPU acceleration or single-thread frequencies above 2.3GHz should evaluate other platforms. The four 3.5-inch bays limit internal drive count, so workloads demanding many local disks need external enclosures. Integrated graphics and 1GbE networking cover basic management only.
384GB DDR4 ECC memory decides fit
The installed 384GB across 24 DIMM slots leaves room to grow toward the 3TB maximum if the application scales. Buyers who need a different capacity or memory speed must reconfigure before purchase.
Points forts
- Dual 12-core Xeon 2670 v3 processors deliver 24 threads at 2.3GHz
- 384GB DDR4 ECC registered memory supports large virtualisation workloads
- Four 3.5-inch LFF drive bays with P440 SAS controller enable flexible storage arrays
- HPE iLO Advanced remote management provides out-of-band server control
- Redundant 500W Flex Slot power supplies maintain uptime during power events
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.3GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 20,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the 2.3GHz Xeon E5-2670 v3 processors into the DL380 Gen9 chassis, and which step is most often missed?
Align the processor notches with the socket keys, lower the retention lever fully until it clicks, then apply thermal paste before seating the heatsink; the step most often missed is torquing the heatsink screws in the diagonal sequence printed on the bracket.
What maintenance will the 500W Flex Slot power supplies need during the server's life?
Replace the hot-plug fan module inside each supply when the iLO health log reports a fan-speed deviation, and swap the entire supply if the LED turns amber after a firmware update.
At what point does the P440 SAS controller become the bottleneck under sustained write workloads?
The controller's 12Gb/s SAS lanes saturate when four 3.5" SATA drives push combined sequential writes beyond the RAID 5 parity calculation throughput, showing as elevated queue depth in iLO performance graphs.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
52,99 $US67,99 $US−22%
0.00067887BTC
En stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
1 267,99 $US
0.01624462BTC
En stock