HPE
HPE ML350 Gen10 4LFF 2x Xeon Silver 4210 1536GB DDR4 rack server
A 4-bay 3.5" rack server with dual Xeon Silver 4210 2.2 GHz 10-core processors, 1.5 TB DDR4 ECC memory, Smart Array P408 SAS controller and dual 500 W supplies
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size1.5TB
- Dual 10-core Xeon 4210 CPUs at 2.2GHz deliver high multi-thread throughput
- 5TB DDR4 ECC registered memory supports large in-memory workloads
- Four 3.5-inch LFF drive bays with P408 SAS controller enable flexible storage arrays
- Dual 500W flex-slot power supplies provide redundancy for continuous uptime
- Integrated iLO Advanced remote management simplifies server administration from anywhere
Configured ProLiant ML350 Gen10
The HPE ML350 Gen10 4LFF chassis arrives with two Xeon Silver 4210 processors, each running at 2.2 GHz with ten cores and 13.75 MB cache. A total of 1536 GB of DDR4 ECC registered memory is installed, and the Smart Array P408 controller manages up to four 3.5-inch SATA drive bays. The system is aimed at organisations that need dense compute and memory capacity in a rack-mount form factor.
Dual 500 W supplies and updated firmware
Two 500 W Flex Slot power supplies share the load, while the latest BIOS and firmware revisions are applied before shipment. A full burn-in and diagnostic cycle verifies stable operation under typical workloads. Remote management is handled through HPE iLO, allowing administrators to monitor thermals and power draw without physical access to the rack.
Four-bay SAS backbone with 10 GbE uplinks
The P408 SAS controller provides the storage backbone, leaving the four large-form-factor bays free for the SATA drives you choose. Network connectivity includes two 10 GbE and two 1 GbE ports via Intel I350 and X540 adapters. Integrated graphics covers basic console output, so a discrete GPU is not required for management tasks.
Points forts
- Dual 10-core Xeon 4210 CPUs at 2.2GHz deliver high multi-thread throughput
- 5TB DDR4 ECC registered memory supports large in-memory workloads
- Four 3.5-inch LFF drive bays with P408 SAS controller enable flexible storage arrays
- Dual 500W flex-slot power supplies provide redundancy for continuous uptime
- Integrated iLO Advanced remote management simplifies server administration from anywhere
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 1.5TB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the two Xeon Silver 4210 processors and what step is often missed?
Install both CPUs into the sockets, apply thermal compound, and lock the retention mechanisms; the step most often missed is updating the BIOS and iLO firmware to the latest stable version before first boot.
What maintenance or replacement will the 1.5TB DDR4 memory configuration need later?
The 1536GB DDR4 ECC registered memory may require DIMM replacement if correctable errors exceed thresholds; firmware updates should be applied periodically to maintain compatibility.
What limit appears first on the dual 500W power supplies under sustained full load?
The 500W Flex Slot power supplies will hit their maximum output capacity first under sustained full load from both 10-core Xeon Silver 4210 CPUs and 1.5TB of DDR4 memory.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



