HPE
HPE ML350 Gen10 8SFF 2x Xeon Silver 4215R 256GB DDR4
Tower server with dual Xeon Silver 4215R processors, 256 GB DDR4 ECC memory, Smart Array P408 controller, eight 2.5-inch bays and dual 500 W supplies
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.2 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon Silver 4215R CPUs deliver 16 cores at 3.2 GHz
- 256 GB DDR4 ECC registered memory supports demanding workloads
- Smart Array P408 SAS controller manages up to eight 2.5" drive bays
- Integrated Intel I350/X540 networking provides 2×10 GbE and 2×1 GbE ports
- Redundant 500 W Flex Slot power supplies keep the system running
Dual Xeon Silver 4215R tower server
The HPE ML350 Gen10 8SFF chassis arrives new with two Xeon Silver 4215R processors running at 3.2 GHz and 256 GB of DDR4 ECC registered memory. A Smart Array P408 SAS controller manages up to eight 2.5-inch SATA drive bays, while dual 500 W Flex Slot supplies power the system. Integrated Intel I350/X540 networking provides two 10 GbE and two 1 GbE ports, and iLO Advanced handles remote management.
Suits virtualisation hosts needing maximum memory
This configuration targets workloads that benefit from 256 GB of installed DDR4 and room to grow to 3 TB across the remaining slots. Buyers who need drives included or prefer a smaller 4 SFF chassis should look elsewhere. The tower form factor also limits deployment in dense rack rows where a 2U rack-mount server would fit better.
256 GB DDR4 ECC registered memory decides fit
The system ships with sixteen 16 GB DDR4 modules occupying half the available slots, leaving sixteen slots open for expansion up to the 3 TB maximum. If the application requires a different memory population or a lower starting capacity, the configuration must be changed before purchase.
Points forts
- Dual Xeon Silver 4215R CPUs deliver 16 cores at 3.2 GHz
- 256 GB DDR4 ECC registered memory supports demanding workloads
- Smart Array P408 SAS controller manages up to eight 2.5" drive bays
- Integrated Intel I350/X540 networking provides 2×10 GbE and 2×1 GbE ports
- Redundant 500 W Flex Slot power supplies keep the system running
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.2 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 1.920,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Will my existing 2.5-inch SATA drives work with the Smart Array P408 controller in this server?
Yes, the P408 controller supports SATA drives and the chassis provides 8 SFF bays for 2.5-inch drives.
How can I confirm both Xeon Silver 4215R processors are running at 3.2 GHz after installation?
Check the CPU speed in the BIOS or via HPE iLO Advanced remote management after boot.
Which components are included and which must be purchased separately for this configuration?
Includes 2x Xeon Silver 4215R CPUs, 256GB DDR4 ECC RAM, P408 controller, 2x 500W power supplies, and Intel I350/X540 network card. Drives and rail kit are not included.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
