HPE
HPE ML350 Gen9 8SFF 2x Xeon E5-2650 v3 256GB DDR4 rack server
Rack server with two Xeon 2.3 GHz processors, 256 GB DDR4 ECC memory and a P440 SAS controller for up to eight 2.5 inch drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.3GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual 10-core Xeon processors deliver 20 threads at 2.3 GHz
- 256 GB DDR4 ECC memory supports 1536 GB maximum capacity
- Eight 2.5-inch SAS drive bays with P440 RAID controller
- Dual 10 GbE plus dual 1 GbE network ports for high-throughput connectivity
- HPE iLO Advanced remote management enables out-of-band server control
Dual Xeon E5-2650 v3 compute platform
This HPE ProLiant ML350 Gen9 rack server delivers twenty cores at 2.3GHz across two installed processors. The chassis supports up to eight 2.5-inch drive bays and ships with 256GB of DDR4 ECC registered memory already populated. It targets workloads that need high thread count and large memory capacity in a tower-compatible rack form factor.
Verify rack depth and power infrastructure
The unit measures 36 inches deep and weighs 40 units, so confirm your rack can accommodate that length and load. Two 500W Flex Slot power supplies are installed; ensure your PDU connectors and circuit capacity match. Network connectivity includes two 10GbE and two 1GbE ports via an Intel I350/X540 adapter, so check switch port availability and cabling type.
P440 controller and iLO Advanced enable storage
The Smart Array P440 SAS controller provides hardware RAID for the eight SFF bays, letting you configure redundancy or performance tiers once drives are added. HPE iLO Advanced remote management is included, giving full out-of-band control, virtual media and health monitoring without an operating system. No drives or rail kit ship by default; both are available on request.
Points forts
- Dual 10-core Xeon processors deliver 20 threads at 2.3 GHz
- 256 GB DDR4 ECC memory supports 1536 GB maximum capacity
- Eight 2.5-inch SAS drive bays with P440 RAID controller
- Dual 10 GbE plus dual 1 GbE network ports for high-throughput connectivity
- HPE iLO Advanced remote management enables out-of-band server control
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.3GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1536GB |
| Hard Drive (Installed) | 7,20 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Does the server ship with any drives or must I purchase SAS drives separately?
No drives are installed; the 8 SFF bays accept 2.5 SAS drives that must be sourced separately.
With two Xeon E5-2650 v3 processors already fitted, is there any processor upgrade path?
The system already holds the maximum of two processors, so no further CPU upgrade is possible.
How does the installed 256 GB DDR4 ECC registered memory perform relative to the 1536 GB maximum?
The 256 GB configuration uses a fraction of the 1536 GB ceiling, leaving ample room to add DDR4 ECC registered modules across the remaining slots.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



