HPE
HPE ProLiant DL360 Gen10 8SFF 2x Xeon Silver 4114 1TB DDR4 rack server
Dual Xeon Silver 4114 10-core CPUs at 2.2 GHz with 1 TB DDR4 ECC memory, Smart Array P408 SAS controller, eight 2.5-inch SFF bays, Intel 2×10 GbE and 2×1 GbE networking, dual 500 W supplies.
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size1TB
- Dual Xeon Silver 4114 processors provide 10 cores each at 2.2GHz
- 1TB DDR4 ECC registered memory supports large workloads
- Smart Array P408 SAS controller manages up to 8 drive bays
- Intel I350/X540 network card adds 2x 10GbE and 2x 1GbE ports
- Dual 500W Flex Slot power supplies deliver redundant power
HPE ProLiant DL360 Gen10 dual Xeon server
The HPE ProLiant DL360 Gen10 is a 1U rack server built for virtualisation and database workloads. It ships with two Xeon Silver 4114 processors running at 2.2GHz, each providing 10 cores and 13.75MB cache. A full 1TB of DDR4 ECC registered memory is installed across the 24 DIMM slots. The Smart Array P408 SAS controller manages up to eight 2.5-inch SATA drive bays.
Upgrade from single-socket
Moving from a single-processor system doubles the thread count and memory bandwidth, which benefits hypervisor hosts running many virtual machines. The jump is worth it when current CPU utilisation stays high under sustained load or when memory capacity limits the number of concurrent workloads. The second processor also unlocks the full 3TB maximum memory ceiling for future expansion.
Tool-less rail installation with controller caveats
The chassis slides into a standard rack on the included rail kit and locks without tools, while the 500W flex-slot power supplies are hot-pluggable. The P408 controller requires the SAS cables to be seated firmly before the first boot or the array will not initialise. Remote setup via iLO Advanced works once the network ports are configured, but the dedicated management port must be cabled separately from the data interfaces.
Points forts
- Dual Xeon Silver 4114 processors provide 10 cores each at 2.2GHz
- 1TB DDR4 ECC registered memory supports large workloads
- Smart Array P408 SAS controller manages up to 8 drive bays
- Intel I350/X540 network card adds 2x 10GbE and 2x 1GbE ports
- Dual 500W Flex Slot power supplies deliver redundant power
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 1TB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What rack width and depth does the 36 x 24 x 10 in chassis require?
The chassis measures 36 inches deep by 24 inches wide by 10 inches high; verify your rack provides at least that depth and width clearance plus rear cable space.
How are the two Xeon Silver 4114 processors and the 1TB DDR4 memory installed, and what step is often missed?
Both processors are already seated in the two sockets and the 1TB of DDR4 ECC registered DIMMs are populated; the common miss is forgetting to apply the latest firmware before first boot.
Which drive bays and controller will need attention when adding storage later?
The front supports up to eight 2.5-inch SATA bays driven by the Smart Array P408 SAS controller; plan to add drives and configure RAID arrays through that controller.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
52,99 $US67,99 $US−22%
0.0006748BTC
En stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
1 267,99 $US
0.01614719BTC
En stock