HPE
HPE ProLiant DL360 Gen10 Xeon Gold 6254 3.1GHz 256GB RAM 960GB SSD
A 1U rack server with dual 18-core Xeon Gold 6254 CPUs at 3.1GHz, 256GB DDR4 ECC memory, dual 480GB SATA SSDs in RAID, dual 10Gb SFP+ networking and redundant 800W power supplies
- TypeRack
- Installed Memory Size256GB
- SSD (Installed)960GB
- Dual 18-core Xeon Gold 6254 CPUs deliver 36 threads at 3.1 GHz
- 256 GB DDR4 ECC memory supports large virtualised workloads
- Two 480 GB SATA SSDs in RAID provide 960 GB protected storage
- Redundant 800 W power supplies maintain uptime during a unit failure
- Dual-port 10 GB Ethernet controller enables high-throughput network connectivity
HPE ProLiant DL360 Gen10 server
The HPE ProLiant DL360 Gen10 is a 1U rack server configured with two Intel Xeon Gold 6254 processors running at 3.1GHz, 256GB of DDR4 ECC memory and 960GB of solid-state storage. It includes dual 800W power supplies, a Smart Array P408i-a storage controller and a dual-port 10GB SFP+ network adapter. The system arrives new and ready for rack deployment.
Ideal for virtualisation and database workloads
This server suits teams that need high core counts, large memory capacity and redundant power in a single rack unit. The dual Xeon Gold 6254 CPUs deliver 36 threads each for heavy multi-threaded applications. Buyers who require GPU acceleration or fibre-channel connectivity should evaluate other platforms.
256GB DDR4 ECC memory installed
The 256GB DDR4 ECC configuration uses Samsung PC4-2933Y modules across the motherboard slots. This capacity supports dense virtual-machine consolidation and in-memory databases. Organisations needing more than 256GB of RAM must verify the motherboard's maximum supported limit before purchase.
Points forts
- Dual 18-core Xeon Gold 6254 CPUs deliver 36 threads at 3.1 GHz
- 256 GB DDR4 ECC memory supports large virtualised workloads
- Two 480 GB SATA SSDs in RAID provide 960 GB protected storage
- Redundant 800 W power supplies maintain uptime during a unit failure
- Dual-port 10 GB Ethernet controller enables high-throughput network connectivity
Caractéristiques
| Type | Rack |
|---|---|
| Installed Memory Size | 256GB |
| SSD (Installed) | 960GB |
Questions sur cet article
What rack depth and clearance does the 1U DL360 Gen10 chassis require for cabling and airflow?
The 1U rackmount chassis fits standard 19-inch racks; verify your cabinet depth against the server's published dimensions to ensure adequate rear cable management space and front-to-back airflow.
Which drive bays and controller ports do the two 480 GB SATA SSDs and the P408i-a SR Gen10 occupy during installation?
The two 2.5-inch SATA SSDs install in the front hot-plug bays and connect to the embedded Smart Array P408i-a SR Gen10 controller using the supplied SAS cables; seat each drive fully until the latch clicks.
When will the installed DDR4-2933 ECC RDIMMs and the 800 W hot-plug power supplies need replacement?
The 256 GB DDR4-2933 ECC memory is rated for continuous server operation and typically lasts the platform lifecycle; the redundant 800 W PSUs should be replaced if a fault LED lights or after the manufacturer's recommended service interval.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



