HPE
HPE ProLiant DL380 Gen10 12LFF rack server 2x Xeon Silver 4210 256GB DDR4
12-bay 3.5-inch rack server with two 10-core 2.2 GHz Xeon Silver 4210 CPUs and 256 GB DDR4 ECC memory
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon Silver 4210 CPUs deliver 10 cores each for multi-threaded performance
- 256GB DDR4 ECC memory supports large virtualisation workloads
- 12 LFF 3.5-inch drive bays allow high-capacity storage expansion
- HPE iLO Advanced remote management enables out-of-band server control
- Dual 800W hot-plug power supplies provide redundant power protection
ProLiant DL380 Gen10 12LFF rack server
The HPE ProLiant DL380 Gen10 is a 2U rack server built for dense storage workloads. It ships with two Intel Xeon Silver 4210 processors running at 2.2 GHz, each providing ten cores. A total of 256 GB of DDR4 ECC registered memory is installed across the twelve LFF drive bays. The Smart Array P816 controller manages SATA drives through a 4 GB cache module.
Suits storage-heavy workloads.
This configuration fits buyers who need twelve 3.5-inch bays for high-capacity SATA drives behind a hardware RAID controller. The dual 10 GbE and dual 1 GbE network ports handle heavy data movement. Buyers who want a smaller chassis, fewer drive bays, or a server without the P816 controller should look at something else. The unit arrives with firmware updated and burn-in tested.
12 LFF bays with P816 RAID decide the fit
The twelve large-form-factor bays paired with the Smart Array P816i-a SR Gen10 controller define whether this server matches the deployment plan. No drives are installed, so the buyer must supply SATA disks that the controller supports. Memory can scale to 3 TB when the application demands it. Two 800 W hot-plug power supplies provide redundancy for the populated configuration.
Points forts
- Dual Xeon Silver 4210 CPUs deliver 10 cores each for multi-threaded performance
- 256GB DDR4 ECC memory supports large virtualisation workloads
- 12 LFF 3.5-inch drive bays allow high-capacity storage expansion
- HPE iLO Advanced remote management enables out-of-band server control
- Dual 800W hot-plug power supplies provide redundant power protection
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 60,00 |
| Storage Controller | HP Smart Array P816 Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How much heat and power should I expect from the two 2.2 GHz Xeon Silver 4210 CPUs and dual 800 W supplies running continuously?
Two 10-core Xeon Silver 4210 processors at 2.2 GHz draw significant power under full load; the redundant 800 W Flex Slot supplies share the load and keep each unit cooler than a single supply would.
What drives and caddies do I need to add before the server can store data?
The 12-bay 3.5-inch LFF chassis ships empty; you must supply SATA hard drives or SSDs and compatible drive carriers to populate the bays.
Will my existing SATA drives work with the Smart Array P816i-a controller in this Gen10 chassis?
Yes, the P816i-a SR Gen10 4 GB controller supports SATA drives in the 12 LFF bays, so older SATA disks can be used directly.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
