HPE
HPE ProLiant DL380 Gen10 2x Xeon Gold 6148 384GB DDR4 rack server
A 2U rack server with dual 2.4 GHz Xeon Gold 6148 CPUs, 384 GB DDR4 ECC memory, a Smart Array P408 SAS controller and dual 500 W power supplies, ready for custom storage and networking
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon Gold 6148 processors at 2.4 GHz for compute-intensive workloads
- 384 GB DDR4 ECC registered memory supports large virtualisation clusters
- HPE Smart Array P408 SAS controller enables flexible RAID configurations
- Dual 500 W Flex Slot power supplies provide redundant power protection
- iLO Advanced remote management allows out-of-band server control
Dual Xeon Gold 6148 compute platform
The HPE ProLiant DL380 Gen10 arrives as a 2U rack server populated with two Intel Xeon Gold 6148 processors running at 2.4GHz. Each CPU contributes ten cores and 27.5MB of cache for a total of twenty cores. The system targets organisations that need dense virtualisation, database or high-performance-computing capacity in a standard rack footprint.
384GB DDR4 with 3TB ceiling
Installed memory sits at 384GB of DDR4 ECC registered DIMMs, leaving headroom to scale toward the 3TB maximum supported by the platform. The Smart Array P408 SAS controller manages up to eight 2.5-inch drive bays through SATA or SAS interfaces. Storage is not included, so capacity and redundancy are defined by the drives you add.
Flexible I/O and remote management
Dual 500W Flex Slot power supplies provide redundancy in a single chassis. Networking is handled by an Intel I350/X540 card delivering two 10GbE and two 1GbE ports. HPE iLO Advanced gives full out-of-band control for firmware updates, hardware monitoring and remote console access without a local display or keyboard.
Points forts
- Dual Xeon Gold 6148 processors at 2.4 GHz for compute-intensive workloads
- 384 GB DDR4 ECC registered memory supports large virtualisation clusters
- HPE Smart Array P408 SAS controller enables flexible RAID configurations
- Dual 500 W Flex Slot power supplies provide redundant power protection
- iLO Advanced remote management allows out-of-band server control
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Can I mix the installed 384 GB DDR4 ECC registered memory with older DDR4 modules I already own?
The server uses DDR4 ECC registered DIMMs; mixing different speeds or ranks is possible but the system will run all memory at the lowest common speed and may require specific population rules outlined in the HPE memory guide.
How can I verify the two Xeon Gold 6148 processors and 384 GB memory are recognised after first boot?
During POST the iLO console and BIOS summary will display two 2.4 GHz 10-core CPUs and 384 GB of DDR4 ECC registered memory; iLO Advanced also shows the full inventory remotely.
Which components ship inside the chassis and which must be ordered separately?
The unit includes two Xeon Gold 6148 CPUs, 384 GB DDR4 ECC registered RAM, a Smart Array P408 SAS controller, dual 500 W Flex Slot power supplies, and an Intel I350/X540 quad-port network card; drive bays are empty and rail kits are available on request.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



