HPE
HPE ProLiant DL380 Gen10 2x Xeon Silver 4108 256GB DDR4 rack server
A 2U rack server with dual 1.8 GHz Xeon Silver 4108 CPUs, 256 GB DDR4 ECC memory, a Smart Array P408 SAS controller and 10 GbE networking, sold without drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.8GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon Silver 4108 processors provide 8 cores each for parallel workloads
- 256GB DDR4 ECC registered memory supports large datasets
- HPE Smart Array P408 SAS controller enables flexible RAID configurations
- Integrated Intel I350/X540 network card offers 2x 10GbE and 2x 1GbE connectivity
- HPE iLO Advanced remote management allows out-of-band server control
Dual Xeon Silver 4108 compute node
The HPE ProLiant DL380 Gen10 delivers two Intel Xeon Silver 4108 processors running at 1.8 GHz with eight cores each and 11 MB cache per chip. A total of 256 GB of DDR4 ECC registered memory is installed across the system board. This configuration targets virtualisation hosts, database clusters and enterprise workloads that demand high core counts and large memory capacity in a 2U rack form factor.
Smart Array P408 with eight 2.5-inch bays
The onboard HPE Smart Array P408 SAS controller manages up to eight 2.5-inch drive bays supporting SATA media. Two 500 W Flex Slot power supplies provide redundant power for the chassis. Network connectivity includes two 10 GbE ports and two 1 GbE ports via Intel I350 and X540 adapters. Remote management is handled by HPE iLO Advanced for out-of-band control and monitoring.
Redundant power and updated firmware
Dual 500 W supplies share the load to keep thermals stable under typical enterprise workloads. Fans adjust speed based on inlet temperature and component utilisation to balance airflow and acoustic output. All BIOS and firmware revisions are updated to the latest stable release before shipment and a full burn-in test verifies thermal behaviour under sustained load.
Points forts
- Dual Xeon Silver 4108 processors provide 8 cores each for parallel workloads
- 256GB DDR4 ECC registered memory supports large datasets
- HPE Smart Array P408 SAS controller enables flexible RAID configurations
- Integrated Intel I350/X540 network card offers 2x 10GbE and 2x 1GbE connectivity
- HPE iLO Advanced remote management allows out-of-band server control
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.8GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 1.920,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What is the maximum memory capacity the DL380 Gen10 can reach with DDR4 modules?
The system supports up to 3TB of DDR4 memory across its DIMM slots.
How much heat must the rack dissipate when both 500 W power supplies run continuously?
Two 500 W Flex Slot supplies can draw up to 1 000 W, so plan cooling for that sustained load.
Which drive interface does the Smart Array P408 controller use for the 2.5-inch bays?
The P408 connects to the eight 2.5-inch bays through SAS lanes that also accept SATA drives.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
52,99 $US67,99 $US−22%
0.00067997BTC
En stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
1 267,99 $US
0.01627088BTC
En stock