HPE
HPE ProLiant DL380 Gen10 rack server 2x Xeon Platinum 8260L 256GB DDR4
Dual 24-core Xeon Platinum 8260L processors and 256GB DDR4 in a 2U chassis supporting up to eight 2.5-inch drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon Platinum 8260L processors provide 24 cores each at 2.4GHz
- 256GB DDR4 ECC registered memory supports demanding workloads
- Smart Array P408 SAS controller manages up to eight 2.5-inch drive bays
- Integrated Intel I350 and X540 network adapters deliver 2x 10GbE and 2x 1GbE connectivity
- HPE iLO Advanced remote management enables secure out-of-band server control
HPE ProLiant DL380 Gen10 dual Xeon server
The HPE ProLiant DL380 Gen10 is a 2U rack server equipped with two Intel Xeon Platinum 8260L processors running at 2.4GHz. Each CPU provides 24 cores and 35.75MB of cache for multi-threaded workloads. The system ships with 256GB of DDR4 ECC registered memory and a Smart Array P408 SAS controller. Integrated graphics and HPE iLO Advanced remote management are included.
Verify rack space power and drive requirements
The chassis measures 36 by 24 by 10 inches and weighs 40 units, so confirm your rack depth and weight capacity before ordering. Two 500W Flex Slot power supplies are installed; ensure your PDU circuits can handle the load. The server supports up to eight 2.5-inch SATA drive bays but no drives are included. The P408 controller uses SAS connectivity, so plan cabling and backplane compatibility accordingly.
Expands to 3TB memory and eight drive bays
Fourteen remaining DIMM slots allow memory expansion up to 3TB of DDR4 when needed. The eight-bay 2.5-inch front cage frees up internal space for storage arrays without occupying PCIe slots. Dual 10GbE and dual 1GbE network ports are fitted on an add-in card, leaving additional slots open for further I/O. Rails are available on request for simplified rack installation.
Points forts
- Dual Xeon Platinum 8260L processors provide 24 cores each at 2.4GHz
- 256GB DDR4 ECC registered memory supports demanding workloads
- Smart Array P408 SAS controller manages up to eight 2.5-inch drive bays
- Integrated Intel I350 and X540 network adapters deliver 2x 10GbE and 2x 1GbE connectivity
- HPE iLO Advanced remote management enables secure out-of-band server control
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7.680,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Does the server ship with drives or do I need to purchase them separately?
The listing states no drives are installed; you must add your own 2.5" SATA or SAS drives up to the 8-bay limit.
Which processor configuration is fitted in this unit?
Two Xeon Platinum 8260L CPUs at 2.4GHz, each with 24 cores and 35.75MB cache.
How much memory is already installed and what type does it use?
256GB of DDR4 ECC registered memory is installed; the board supports up to 3TB total.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



