HPE
HPE ProLiant DL380 Gen11 2U Rack Server Dual Xeon 5416s 512GB 7.68TB
Dual 16-core Xeon 5416s server with 512 GB DDR5 and 7.68 TB SATA SSD storage in a 2U rack chassis
- Dual Xeon Gold 5416s 16-core 2.00 GHz up to 4.00 GHz turbo
- 512GB DDR5-4800 ECC buffered memory in eight 64GB modules
- 68TB enterprise SATA SSD storage across four 1.92TB drives
- MR408i-o Gen11 storage controller with 4GB cache for RAID performance
- Redundant hot-swap power supplies keep the server running during replacement
Hybrid-Ready 2U Rack Server
The HPE ProLiant DL380 Gen11 is a dual-socket 2U rack server built for hybrid environments. It targets organisations that need a balance of expandability and scalability for virtualised workloads. Integrated iLO 6 provides remote management and intelligent provisioning out of the box.
512GB DDR5 Memory and 7.68TB SSD Storage
Eight 64GB DDR5-4800 ECC modules deliver 512GB of buffered memory with 30MB cache per processor for large dataset handling. Four 1.92TB enterprise SATA SSDs provide 7.68TB of hot-swappable capacity. The MR408i-o controller with 4GB cache manages the array, while memory and drives ship separately for on-site installation.
Dual Xeon Gold 5416s 16-Core Processors
Two Xeon Gold 5416s CPUs run at 2.00 GHz base with 4.00 GHz turbo across 16 cores each. This configuration suits multi-threaded database and virtualisation tasks. Buyers needing higher core counts or different processor frequencies should evaluate alternative configurations. PCIe Gen5 slots support future I/O expansion.
Points forts
- Dual Xeon Gold 5416s 16-core 2.00 GHz up to 4.00 GHz turbo
- 512GB DDR5-4800 ECC buffered memory in eight 64GB modules
- 68TB enterprise SATA SSD storage across four 1.92TB drives
- MR408i-o Gen11 storage controller with 4GB cache for RAID performance
- Redundant hot-swap power supplies keep the server running during replacement
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
Can the 512GB DDR5-4800 ECC buffered memory operate alongside older DDR5 modules I already own?
The server uses eight 64GB DDR5-4800 PC5-38400 ECC buffered DIMMs; mixing different speeds or ranks is not supported by the platform, so replace the full set rather than add older modules.
How can I verify the MR408i-o storage controller and four 1.92TB SATA SSDs are recognised after installation?
During POST the MR408i-o Gen11 controller initialises, then use HPE iLO 6 Intelligent Provisioning to confirm all four 1.92TB drives appear and the 7.68TB array is healthy.
Which components ship separately and must be installed before first power-on?
The 512GB DDR5 memory kit and the four 1.92TB enterprise SATA SSDs are packaged separately and require installation; the rail kit, dual redundant power supplies, embedded 4-port 1GbE OCP3 adapter and Windows Server 2022 Standard licence are included ready to deploy.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



