HPE
HPE ProLiant DL380 Gen11 2U rack server dual Xeon 6430 32-core 2.1GHz 512GB 7.68TB SATA SSD
2U rack server with dual 32-core Xeon 6430 processors, 512GB DDR5 memory and 7.68TB SATA SSD storage
- Dual Xeon 6430 processors with 64 cores total at 2.1GHz base clock
- 512GB DDR5-4800 ECC memory across eight 64GB modules for virtualization density
- 68TB enterprise SATA SSD storage via four 1.92TB drives in 2.5-inch form factor
- Redundant hot-swap power supplies maintain uptime during module replacement
- HPE iLO 6 remote management with intelligent provisioning for lights-out administration
Dual Xeon 6430 server for virtualized workloads
This 2U rack server ships with two Xeon Gold 6430 processors, each providing 32 cores at 2.1 GHz with a 3.40 GHz turbo frequency and 60 MB cache. The platform targets enterprises running database applications, virtualization clusters or multiple simultaneous workloads. It includes 512 GB of DDR5-4800 ECC buffered memory across eight 64 GB modules and 7.68 TB of enterprise SATA SSD storage on four 1.92 TB drives. Hard drives and memory upgrades are supplied separately and require installation.
Sustained throughput with PCIe Gen5 and DDR5
Dual Xeon Scalable processors and DDR5-4800 memory deliver scalable bandwidth for continuous data-intensive tasks rather than short bursts. The MR408i-o Gen11 storage controller with 4 GB cache and x8 lanes manages the four SATA SSDs under constant I/O load. Redundant hot-swappable power supplies allow a failed unit to be replaced without taking the server offline, maintaining uptime during extended operations. Embedded 4-port 1 GbE OCP3 networking provides consistent connectivity for steady-state traffic.
Serviceable 2U chassis with iLO 6 remote management
The 2U form factor balances expandability with rack density while supporting tool-less component access for routine maintenance. Integrated Lights-Out 6 (iLO 6) with Intelligent Provisioning enables remote firmware updates, hardware health monitoring and OS deployment without physical presence. The OCP3 storage controller and network adapter use standardised mezzanine slots, simplifying future controller swaps. Rail kit is included for secure mounting in standard racks.
Points forts
- Dual Xeon 6430 processors with 64 cores total at 2.1GHz base clock
- 512GB DDR5-4800 ECC memory across eight 64GB modules for virtualization density
- 68TB enterprise SATA SSD storage via four 1.92TB drives in 2.5-inch form factor
- Redundant hot-swap power supplies maintain uptime during module replacement
- HPE iLO 6 remote management with intelligent provisioning for lights-out administration
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
How much heat and power draw should I expect from the dual Xeon 6430 32-core 2.10 GHz CPUs running continuously?
Each Xeon 6430 is a 32-core 2.10 GHz processor with 60 MB cache and up to 3.40 GHz turbo; the server uses redundant hot-swap power supplies to handle the load.
Which components must I install myself before the server will boot?
The 512 GB DDR5-4800 MHz ECC buffered memory (8 x 64 GB) and the 7.68 TB enterprise SATA SSDs (4 x 1.92 TB) ship separately and require installation.
Can I keep using my existing PCIe Gen4 expansion cards in this Gen11 chassis?
The platform supports PCIe Gen5 slots, which are backward compatible with Gen4 cards, and includes an MR408i-o Gen11 x8 lane storage controller with 4 GB cache.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



