HPE
HPE ProLiant DL380 Gen9 4LFF 2x Xeon E5-2640 v4 256GB DDR4
A 2U rack server with two 10-core Xeon processors at 2.4 GHz, 256 GB DDR4 ECC memory, a P440 SAS controller for up to four 3.5-inch SATA drives, dual 500 W power supplies and iLO remote management
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual 10-core Xeon E5-2640 v4 CPUs at 2.4GHz deliver 20 threads for heavy workloads
- 256GB DDR4 ECC registered memory supports large datasets and virtualisation
- HPE Smart Array P440 SAS controller enables flexible RAID across four 3.5-inch drive bays
- Integrated iLO Advanced remote management provides full out-of-band server control
- Redundant 500W Flex Slot power supplies maintain uptime during power-supply failure
HPE ProLiant DL380 Gen9 4LFF server
This HPE ProLiant DL380 Gen9 4LFF system arrives with two Intel Xeon E5-2640 v4 processors running at 2.4GHz and 256GB of DDR4 ECC registered memory. The 4LFF chassis supports up to four 3.5-inch drive bays for SATA or SAS storage. It is built for organisations that need a dense 2U rack platform for virtualisation, databases or general-purpose workloads.
Smart Array P440 controller and iLO Advanced
The integrated HPE Smart Array P440 SAS controller provides hardware RAID for the installed drive bays, while HPE iLO Advanced remote management enables out-of-band monitoring, firmware updates and power control without an operating system. Two 500W Flex Slot power supplies deliver redundancy. These bundled components reduce the parts a buyer must source separately.
DDR4 memory ceiling and 1GbE network limit
The platform accepts up to 3TB of DDR4 memory across its DIMM slots, so the 256GB installed leaves headroom for growth but cannot use newer memory generations. Network connectivity is limited to the onboard 1GbE 332T dual-port adapter; faster Ethernet or additional NICs require open PCIe slots. No drives are included, so storage capacity and performance depend entirely on the drives the buyer adds.
Points forts
- Dual 10-core Xeon E5-2640 v4 CPUs at 2.4GHz deliver 20 threads for heavy workloads
- 256GB DDR4 ECC registered memory supports large datasets and virtualisation
- HPE Smart Array P440 SAS controller enables flexible RAID across four 3.5-inch drive bays
- Integrated iLO Advanced remote management provides full out-of-band server control
- Redundant 500W Flex Slot power supplies maintain uptime during power-supply failure
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 20,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What drive replacements will the four 3.5-inch bays require over time?
The bays accept 3.5-inch SATA drives; any failed drive can be swapped with a compatible SATA unit.
Which component hits its limit first during sustained heavy workloads?
The pair of Xeon E5-2640 v4 processors, each with 10 cores, will reach full utilisation before the 256GB DDR4 memory or the P440 SAS controller saturate.
How much fan noise and heat should I expect when the server runs 24/7 with two 500W power supplies?
Dual 500W flex-slot supplies and integrated graphics keep power draw moderate; the chassis fans will ramp up under load but remain within typical rack-mount acoustics.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
