HPE
HPE ProLiant DL380 Gen9 4LFF 2x Xeon E5-2667 v4 256GB DDR4
Dual 3.2 GHz Xeon processors with 256 GB DDR4 ECC memory in a four-bay 3.5-inch chassis with P440 SAS controller and iLO remote management
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon E5-2667 v4 at 3.2GHz deliver high single-thread performance
- 256GB DDR4 ECC registered memory supports large virtualised workloads
- HPE Smart Array P440 SAS controller enables flexible RAID arrays
- HPE iLO Advanced provides full remote server management
- 4-bay 3.5-inch LFF chassis offers dense local storage capacity
HPE DL380 Gen9 4LFF dual Xeon server
This HPE ProLiant DL380 Gen9 rack-mount system ships with two Intel Xeon E5-2667 v4 processors running at 3.2 GHz and 256 GB of DDR4 ECC registered memory. The 4LFF chassis supports up to four 3.5-inch SATA drives managed by an HPE Smart Array P440 SAS controller. Remote administration is provided by HPE iLO Advanced, and dual 500 W Flex Slot power supplies are installed.
Ideal for virtualisation hosts
The 256 GB DDR4 capacity and dual eight-core CPUs suit workloads that need large memory footprints and strong single-thread performance. Buyers who need more than four drive bays, GPU accelerator slots, or a single-socket platform with lower power draw should look elsewhere.
256 GB DDR4 ECC registered memory installed
This is the maximum memory configuration currently populated in the system. The board can scale to 3 TB total, so the decision point is whether the workload fits in 256 GB today or requires additional DIMMs before deployment.
Points forts
- Dual Xeon E5-2667 v4 at 3.2GHz deliver high single-thread performance
- 256GB DDR4 ECC registered memory supports large virtualised workloads
- HPE Smart Array P440 SAS controller enables flexible RAID arrays
- HPE iLO Advanced provides full remote server management
- 4-bay 3.5-inch LFF chassis offers dense local storage capacity
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Do I need to supply my own 3.5" SATA drives for the four LFF bays?
Yes, the chassis provides four 3.5-inch bays and the P440 controller uses SATA, but no drives are installed.
Will the dual 500W power supplies run with the existing E5-2667 v4 CPUs and 256GB DDR4?
The two 500W flex-slot units are the standard configuration for this CPU and memory combination.
How can I confirm the P440 controller sees the drives after installation?
Check the iLO interface or the controller BIOS during POST; both will list detected SATA drives and RAID status.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
