HPE
HPE ProLiant DL380 Gen9 8SFF 1x Xeon E5-2697 v3 256GB DDR4
A 2U rack server holding eight 2.5-inch drive bays, one 14-core Xeon at 2.6 GHz and 256 GB DDR4 with a P440 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size256GB
- 14-core Xeon E5-2697 v3 at 2.6 GHz handles heavy workloads
- 256 GB DDR4 ECC registered memory supports large datasets
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
- Dual 10 GbE and dual 1 GbE ports provide high-speed connectivity
- HPE iLO Advanced remote management simplifies server administration
Server purpose
The HPE ProLiant DL380 Gen9 is a 2U rack server built for virtualisation clusters, database workloads and enterprise applications that demand high core counts and large memory capacity. It ships with a single Xeon E5-2697 v3 processor running at 2.6 GHz with 14 cores and 35 MB cache, plus 256 GB of DDR4 ECC registered memory installed. The chassis supports up to eight 2.5 inch drive bays and a second processor socket for future expansion.
Thermals and power
Dual 500 W Flex Slot power supplies provide redundancy and efficient delivery under typical loads. The system uses HPE's standard thermal design with managed fan curves that balance airflow and acoustic output in data-centre racks. Power draw scales with CPU utilisation and the number of populated drive bays, while the integrated iLO Advanced remote management lets administrators monitor temperatures and power metrics without physical access.
Included controller and networking
A Smart Array P440 SAS controller handles RAID for SATA and SAS drives added to the eight-bay backplane. Networking is supplied by an Intel I350/X540 card delivering two 10 GbE and two 1 GbE ports for flexible uplink and management traffic. iLO Advanced enables remote console, virtual media and firmware updates across the fleet. Rails are available on request and the unit arrives with BIOS and firmware updated to the latest stable release.
Points forts
- 14-core Xeon E5-2697 v3 at 2.6 GHz handles heavy workloads
- 256 GB DDR4 ECC registered memory supports large datasets
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
- Dual 10 GbE and dual 1 GbE ports provide high-speed connectivity
- HPE iLO Advanced remote management simplifies server administration
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 2,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the Xeon E5-2697 v3 processor into this DL380 Gen9 and what step is often missed?
Open the chassis, locate the empty second CPU socket, align the processor notches with the socket keys, lower the retention lever fully, then attach the heatsink using the pre-applied thermal paste before closing the cover.
What maintenance or replacement will the 256GB DDR4 memory configuration need later?
The installed DDR4 ECC registered modules run at standard voltage; plan to add matching DDR4 DIMMs up to the 3TB maximum if workloads grow, and replace any module that reports corrected errors in iLO logs.
What limit appears first when the P440 controller drives eight SFF bays under sustained write load?
The P440 SAS controller's cache and the 500W power supplies set the practical ceiling; sustained writes across all eight bays will hit the controller's write-cache flush rate before the drives reach their SATA throughput limits.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



