HPE
HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2699 v4 128GB DDR4 No Drive
Dual 2.2 GHz 22-core Xeon E5-2699 v4 processors, 128 GB DDR4 ECC memory, eight 2.5-inch SAS/SATA bays with a P440 controller, dual 10 GbE plus dual 1 GbE networking.
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size128GB
- Dual Xeon E5-2699 v4 CPUs deliver 44 cores at 2.2GHz
- 128GB DDR4 ECC memory supports demanding workloads
- Eight 2.5-inch drive bays with P440 SAS controller for flexible storage
- Integrated iLO Advanced remote management enables full out-of-band control
- Redundant 500W power supplies ensure continuous operation
HPE ProLiant DL380 Gen9 8SFF Server
This rack-mount server system ships with two Xeon E5-2699 v4 processors at 2.2GHz and 128GB of DDR4 ECC registered memory. The 8SFF chassis supports up to eight 2.5-inch drive bays and includes an HPE Smart Array P440 SAS controller. Integrated graphics and HPE iLO Advanced remote management are standard. No drives are installed.
Upgrade from single-socket or lower-core systems
The dual 22-core configuration delivers 44 threads for virtualisation, database and compute-heavy workloads. Maximum memory capacity reaches 3TB across 24 DIMM slots when the application demands it. The jump is worth it when your current host saturates CPU queues or memory channels under sustained load.
Verify rack depth and power before ordering
The unit measures 36 x 24 x 10 inches and weighs 40 pounds, so confirm cabinet clearance and floor loading. Two 500W Flex Slot power supplies are installed; check that your PDU connectors and circuit capacity match. Network interfaces include two 10GbE and two 1GbE ports — ensure your switch ports and cabling support the required speeds.
Points forts
- Dual Xeon E5-2699 v4 CPUs deliver 44 cores at 2.2GHz
- 128GB DDR4 ECC memory supports demanding workloads
- Eight 2.5-inch drive bays with P440 SAS controller for flexible storage
- Integrated iLO Advanced remote management enables full out-of-band control
- Redundant 500W power supplies ensure continuous operation
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How deep is the rack space needed for the 36 x 24 x 10 in chassis?
The server measures 36 inches deep, so allow at least 36 inches of clear rack depth plus cable clearance behind the rear panel.
Which drive bays accept the 2.5" SAS or SATA drives supported by the P440 controller?
The 8SFF chassis provides eight front-accessible 2.5-inch bays; insert each drive until the carrier clicks into the backplane connector.
When should the DDR4 ECC registered memory modules be replaced if ECC errors appear?
Replace the 128GB DDR4 ECC registered modules when the iLO log reports uncorrectable memory errors or the system health LED shows a memory fault.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



