HPE
HPE ProLiant ML30 Gen10 Plus Tower Server Xeon E-2314 32GB DDR4 32TB HDD
Tower server with a four-core Xeon E-2314 processor, 32GB DDR4 memory and 32TB of SATA hard-drive storage, plus integrated remote management
- 4-core Xeon E-2314 at 2.8 GHz handles core workloads
- 32 GB DDR4 3200 MHz memory scales with demand
- 32 TB across four 8 TB SATA drives stores bulk data
- Smart Array VROC RAID protects against drive failure
- iLO dedicated NIC enables remote server management
Tower server for small offices
The HPE ProLiant ML30 Gen10 Plus is a tower server built for small businesses and remote offices. It ships with a Xeon E-2314 4-core processor running at 2.8GHz with turbo up to 4.5GHz. The system includes 32GB of DDR4 3200MHz memory in two 16GB modules and 32TB of storage across four 8TB SATA 3.5-inch drives. Memory and drives are supplied separately and require installation before use.
Upgrade from entry systems
This server replaces basic workstations or older towers when ECC memory, hardware RAID and dedicated remote management become necessary. The Smart Array VROC controller handles the four included drives, while the iLO dedicated NIC port provides out-of-band access. The jump is worth it when uptime, data redundancy and lights-out administration outweigh the simplicity of a standard desktop platform.
Steady load with single supply
Under sustained workloads the single cabled power supply delivers continuous power to the processor, memory and all four spinning drives. The embedded Broadcom BCM5720 dual-port 1Gb Ethernet adapter maintains network connectivity without adding expansion cards. Four PCIe slots and an M.2 slot remain available for additional controllers or storage if the workload grows beyond the base configuration.
Points forts
- 4-core Xeon E-2314 at 2.8 GHz handles core workloads
- 32 GB DDR4 3200 MHz memory scales with demand
- 32 TB across four 8 TB SATA drives stores bulk data
- Smart Array VROC RAID protects against drive failure
- iLO dedicated NIC enables remote server management
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
Will the four 3.5-inch 8TB SATA drives fit inside the tower chassis?
Yes, the tower accepts four 3.5-inch SATA drives for the 32TB configuration.
What is the first step when installing the 2 x 16GB DDR4 3200MHz memory modules?
Power down the server, open the chassis, and seat each DIMM fully until the retention clips click.
How often should I check the Smart Array VROC RAID health on the 32TB array?
Review the RAID status in iLO or the OS at least monthly and after any drive event.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



