HPE
HPE ProLiant ML350 Gen11 Tower Server Dual Xeon 4410y 12-Core 2.00GHz 512GB DDR5 15.36TB SATA SSD
Tower server with dual 12-core Xeon Silver 4410y at 2.00 GHz, 512 GB DDR5-4800 ECC memory and 15.36 TB of enterprise SATA SSD storage
- TypeTower
- CPU TypeIntel Xeon
- MAX Processors2
- Memory TypeDDR5
- Max Memory Capacity512GB
- Dual Xeon Silver 4410y 12-core processors reach 3.90 GHz turbo for responsive compute
- 512 GB DDR5-4800 ECC memory supports large virtualised workloads with error correction
- 36 TB enterprise SATA SSD storage across four 3.84 TB drives provides high-capacity fast access
- Redundant hot-swap power supplies keep the server running during a module replacement
- Embedded four-port 1GbE OCP3 adapter plus iLO 6 remote management simplifies network and admin tasks
HPE ProLiant ML350 Gen11 Tower Server
The HPE ProLiant ML350 Gen11 is a 2P tower server built for hybrid environments and virtualized workloads. It ships with dual Xeon Silver 4410y processors, each offering 12 cores at 2.00 GHz with a 3.90 GHz turbo frequency. The system includes 512GB of DDR5-4800MHz ECC buffered memory across eight 64GB modules. Storage comprises 15.36TB of enterprise SATA SSDs configured as four 3.84TB drives.
Redundant power and 1GbE networking
Dual hot-swappable power supplies provide redundancy so a faulty unit can be replaced without taking the server offline. An embedded 4-port 1GbE Ethernet OCP3 adapter handles network connectivity. The MR408i-o Gen11 storage controller with 4GB cache manages the SATA SSD array. Integrated Lights-Out 6 enables remote management and intelligent provisioning for day-to-day administration.
Sustained operation under load
PCIe Gen5 lanes deliver scalable bandwidth for continuous data transfer during extended database or virtualization tasks. The DDR5 memory architecture supports sustained throughput with ECC protection for data integrity. Redundant power and hot-swap capability maintain uptime throughout prolonged heavy utilisation. Memory and drives are supplied separately and require installation before deployment.
Points forts
- Dual Xeon Silver 4410y 12-core processors reach 3.90 GHz turbo for responsive compute
- 512 GB DDR5-4800 ECC memory supports large virtualised workloads with error correction
- 36 TB enterprise SATA SSD storage across four 3.84 TB drives provides high-capacity fast access
- Redundant hot-swap power supplies keep the server running during a module replacement
- Embedded four-port 1GbE OCP3 adapter plus iLO 6 remote management simplifies network and admin tasks
Caractéristiques
| Type | Tower |
|---|---|
| CPU Type | Intel Xeon |
| MAX Processors | 2 |
| Memory Type | DDR5 |
| Max Memory Capacity | 512GB |
Questions sur cet article
How do I install the 8 DDR5 modules and 4 SATA SSDs that ship separately?
Open the chassis, seat the 8 x 64GB DDR5-4800MHz PC5-38400 ECC buffered DIMMs into the memory slots, then insert the 4 x 3.84TB 2.5-inch SATA III SSDs into the hot-swap drive bays and secure them.
What maintenance will the redundant power supplies and MR408i-o controller need over time?
Replace a failed hot-swappable power supply without downtime; monitor the MR408i-o Gen11 x8 lanes 4GB cache OCP SPDM storage controller battery and firmware, and swap any SSD that reaches its write endurance limit.
Which limit appears first when both Xeon Silver 4410y CPUs run sustained workloads?
The 2.00GHz base frequency across the 12 cores per processor is the first ceiling; turbo up to 3.90GHz activates only within thermal and power headroom, so prolonged heavy loads settle at base speed.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



