HPE
HPE ProLiant ML350 Gen9 8LFF 2× Xeon E5-2699 v4 64GB DDR4
Tower server holding up to eight 3.5-inch drives, dual Xeon E5-2699 v4 CPUs at 2.2GHz with 22 cores each, 64GB DDR4 ECC memory and a P440 SAS controller, iLO remote management and dual 500W supplies
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size64GB
- Dual 22-core Xeon E5-2699 v4 processors deliver 44 threads at 2.2 GHz
- 64 GB DDR4 ECC registered memory scales to 1536 GB maximum capacity
- Eight 3.5-inch LFF drive bays with P440 SAS controller support SATA storage arrays
- HPE iLO Advanced remote management enables out-of-band monitoring and firmware updates
- Dual 500 W Flex Slot power supplies provide redundant power in 36 x 24 x 10 in chassis
HPE ML350 Gen9 8LFF dual Xeon server
The HPE ProLiant ML350 Gen9 ships as an 8-bay large-form-factor chassis with two Intel Xeon E5-2699 v4 processors running at 2.2GHz and 64GB of DDR4 ECC registered memory. A P440 SAS controller manages up to eight 3.5-inch SATA drives, while dual 500W Flex Slot power supplies and HPE iLO remote management come standard.
Organisations refreshing Gen9 infrastructure
This configuration suits teams that need the 44-core total and 55MB cache per processor for virtualisation or database workloads within the 1536GB memory ceiling. Buyers who require GPU acceleration, higher-speed networking than the installed 10GbE and 1GbE ports, or a different drive bay count should evaluate other platforms.
P440 SAS controller with eight LFF bays
The Smart Array P440 is the only RAID engine included, so storage expansion depends on its SAS and SATA support across the eight 3.5-inch bays. Memory can scale to 1536GB across the 24 DIMM slots when workloads outgrow the factory 64GB.
Points forts
- Dual 22-core Xeon E5-2699 v4 processors deliver 44 threads at 2.2 GHz
- 64 GB DDR4 ECC registered memory scales to 1536 GB maximum capacity
- Eight 3.5-inch LFF drive bays with P440 SAS controller support SATA storage arrays
- HPE iLO Advanced remote management enables out-of-band monitoring and firmware updates
- Dual 500 W Flex Slot power supplies provide redundant power in 36 x 24 x 10 in chassis
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1536GB |
| Hard Drive (Installed) | 12,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How often should the 500W Flex Slot power supplies be inspected or replaced under continuous operation?
HPE recommends periodic visual checks of the redundant 500W Flex Slot units; replacement is typically driven by fan wear or capacity degradation after several years of 24/7 load.
Which component hits its ceiling first when both Xeon E5-2699 v4 processors run at 2.2 GHz across all 22 cores?
The 64 GB DDR4 ECC registered memory fills well before the 1536 GB maximum, so capacity becomes the practical limit for memory-intensive workloads.
What noise and heat levels should I expect from the 8LFF chassis with dual CPUs and twin 500W supplies running all day?
The tower-form 36 x 24 x 10 in chassis uses variable-speed fans; under sustained load acoustics rise to typical rack-server levels while exhaust air stays within ASHRAE A2 limits.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



