Hynix
Hynix 4 GB DDR2 800 MHz 2×2 GB 240-pin SO-DIMM desktop RAM
Two 2 GB DDR2 modules running at 800 MHz give 4 GB total capacity in a 240-pin SO-DIMM form factor
- Dual-channel 4 GB capacity from two 2 GB modules
- 800 MHz DDR2 speed rated at PC2-6400
- 240-pin SO-DIMM form factor fits compatible desktop slots
- 2Rx8 organisation supports standard memory controller access
- Hynix manufacture provides reliable component quality
Hynix DDR2 SO-DIMM Kit
This kit provides two 2 GB modules for a total of 4 GB of DDR2 memory. It runs at 800 MHz with a PC2-6400 bus speed. The 240-pin SO-DIMM form factor is designed for desktop systems that accept this specific module type. Both modules are unbuffered and non-ECC.
Suits older DDR2 desktops needing a matched pair
Ideal for upgrading or repairing a desktop motherboard that uses DDR2 SO-DIMM slots and supports 800 MHz operation. The dual-channel kit ensures matched timing. Not suitable for laptops requiring standard 204-pin SO-DIMMs or systems limited to lower DDR2 speeds. Buyers needing higher capacity or newer memory standards must choose a different product.
Key spec: 240-pin DDR2 SO-DIMM at 800 MHz
The 240-pin SO-DIMM interface combined with the DDR2-800 rating is the single specification that determines compatibility. Verify the motherboard manual for 240-pin SO-DIMM support and PC2-6400 speed before purchase. Using these modules in a board with a different pin count or memory type will prevent the system from booting.
Points forts
- Dual-channel 4 GB capacity from two 2 GB modules
- 800 MHz DDR2 speed rated at PC2-6400
- 240-pin SO-DIMM form factor fits compatible desktop slots
- 2Rx8 organisation supports standard memory controller access
- Hynix manufacture provides reliable component quality
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
How do I install the 240-pin SO-DIMM modules and what step is often missed?
Align the notch on each 2 GB module with the slot key, press firmly until the side clips click shut, then verify both sticks show 4 GB total in the BIOS.
What maintenance or replacement will the DDR2 kit need later?
No routine maintenance is required; replacement is only necessary if a module fails or the system is upgraded beyond DDR2 technology.
What limit appears first when the PC2-6400 memory runs under sustained load?
The 800 MHz bus speed and DDR2 architecture set the maximum throughput ceiling during extended heavy workloads.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



