KHACHIMO
KHACHIMO 10Pin 180W ATX Power Supply
An 180W ATX unit with a 10-pin connector, 80 PLUS Gold efficiency, Zero RPM fan mode and Modern Standby support for silent, low-power operation
- TypeATX
- Modern Standby compatible for faster wake times
- 80 PLUS Gold efficiency reduces power draw and heat
- Zero RPM fan mode keeps operation silent at low loads
- Resonant LLC topology with DC-to-DC delivers clean, stable power
- 10-pin ATX connector fits compatible small-form-factor systems
Compact ATX power supply
The KHACHIMO 10Pin 180W unit is an ATX form-factor power supply built for small-form-factor PCs and OEM replacements. It delivers 180 watts through a 10-pin connector and carries 80 PLUS Gold certification for high efficiency. Modern Standby compatibility enables extremely fast wake-from-sleep times and better low-load efficiency.
10-pin connector fit
The single specification that decides fit is the 10-pin output connector paired with an 180W rating. Match this pin count and wattage to the motherboard or chassis power header before ordering; other pin layouts or higher-wattage requirements will not work with this unit.
Silent low-load operation seekers
Zero RPM fan mode stops the fan entirely at low and medium loads, while resonant LLC topology with DC-to-DC conversion reduces coil whine for quieter operation. Builders needing more than 180 watts or a standard 24-pin ATX connector should look at a different power supply.
Points forts
- Modern Standby compatible for faster wake times
- 80 PLUS Gold efficiency reduces power draw and heat
- Zero RPM fan mode keeps operation silent at low loads
- Resonant LLC topology with DC-to-DC delivers clean, stable power
- 10-pin ATX connector fits compatible small-form-factor systems
Caractéristiques
| Type | ATX |
|---|
Questions sur cet article
What does the 180 W rating actually deliver in a running system?
The unit can supply up to 180 W of continuous DC power to the motherboard and connected components, with 80 PLUS Gold efficiency reducing waste heat at typical loads.
Which connector standard does the 10-pin ATX plug follow, and what limits does it impose?
The 10-pin ATX connector follows the proprietary pin-out used by several small-form-factor boards, so it only fits systems wired for that exact layout.
What clearance and mounting points does the PSU need inside the case?
It uses the standard ATX mounting pattern with four rear screws and requires enough depth for a typical ATX-length body plus cable bend radius.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PNY Technologies, Inc. VCNRTX4000ADALP-PB RTX 4000 Ada 20GB GDDR6 workstation graphics card
- PCI Express 4.0 x16
- NVIDIA



