Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
KHACHIMO 60W ATX power supply unit in metal casing with cooling fan and cable bundle

KHACHIMO

KHACHIMO 14.5V 3.2A 60W ATX Power Supply Upgrade Version

SKU CH-PG0N-1EZCT

Delivers 60 W at 14.5 V 3.2 A with 80 PLUS Gold efficiency, zero-RPM fan mode and LLC resonant topology for silent, low-loss operation

  • TypeATX
  • Fast wake-from-sleep with Modern Standby support
  • 80 PLUS Gold efficiency cuts power use and heat
  • Zero RPM fan mode keeps operation silent at low load
  • Resonant LLC topology with DC-to-DC gives clean, stable power
  • 60 W ATX output at 14.5 V and 3.2 A

KHACHIMO 60W ATX Power Supply

The KHACHIMO 60W ATX power supply delivers 14.5V at 3.2A for systems that require this specific voltage and current combination. It is built for compact or proprietary builds where a standard high-wattage unit is unnecessary. Modern Standby support enables extremely fast wake-from-sleep times and improved low-load efficiency.

Suits small-form-factor

This unit suits builders replacing an EST-60-14.5 or YMFFV-2056XIXA power supply in a space-constrained chassis. The 80 PLUS Gold certification and Zero RPM fan mode keep noise and heat low at typical loads. Systems requiring higher wattage, different voltage rails, or standard 24-pin ATX connectors for mainstream motherboards should look elsewhere.

Verify your motherboard accepts 14.5V 3.2A input

Check that your board or chassis power connector matches the 14.5V 3.2A specification before ordering. Confirm the physical connector type and pin-out align with the original EST-60-14.5 unit. Ensure the case has room for an ATX-form-factor supply and that the LLC resonant topology with DC-to-DC conversion is compatible with your sleep-state requirements.

Points forts

  • Fast wake-from-sleep with Modern Standby support
  • 80 PLUS Gold efficiency cuts power use and heat
  • Zero RPM fan mode keeps operation silent at low load
  • Resonant LLC topology with DC-to-DC gives clean, stable power
  • 60 W ATX output at 14.5 V and 3.2 A

Caractéristiques

TypeATX

Questions sur cet article

What motherboard power connector does the KHACHIMO 14.5V 3.2A 60W ATX unit require?

It uses a standard ATX connector, so any motherboard with a 20-pin or 24-pin ATX socket will accept it directly.

Will this 60W ATX supply work with older components that draw very little power at idle?

Yes, the Zero RPM Fan Mode keeps the fan off at low and medium loads, and the Resonant LLC topology supports modern low-power sleep states without coil whine.

How can I confirm the PSU is delivering its rated output after installation?

The 80 PLUS Gold certification guarantees at least 80% efficiency at typical loads, and Modern Standby compatibility means wake-from-sleep should be near-instant when the system is working correctly.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.