KHACHIMO
KHACHIMO PS-2801-4H-LF 800W ATX Power Supply
An 800 W ATX power supply with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for quiet, low-power sleep states
- TypeATX
- Modern Standby support for near-instant wake and low-load efficiency
- 80 PLUS Gold certified for high efficiency and cooler operation
- Zero RPM fan mode stops the fan at low loads for silent running
- Resonant LLC with DC-to-DC conversion delivers clean power and reduces coil whine
- ATX form factor 800W unit built for modern desktop builds
800W ATX Power Supply for Modern PCs
The KHACHIMO PS-2801-4H-LF delivers 800 watts of continuous power through the ATX form factor. It targets builders who need reliable energy for mid-range components and want certified efficiency. The unit carries 80 PLUS Gold certification for reduced waste heat and lower electricity draw.
Replaces older Bronze or unrated units
Moving up from a lower-efficiency supply cuts power loss at the wall and lets the fan stay off longer under light loads. The jump is worth it when the system spends long periods idle or in Modern Standby sleep, where the Gold-rated platform keeps consumption minimal.
Limited by ATX connector set and fixed cables
The standard ATX layout dictates which motherboards and graphics cards can be powered without adapters. Builders needing extra PCIe plugs for multi-GPU arrays or server-grade EPS connectors must verify compatibility before purchase.
Points forts
- Modern Standby support for near-instant wake and low-load efficiency
- 80 PLUS Gold certified for high efficiency and cooler operation
- Zero RPM fan mode stops the fan at low loads for silent running
- Resonant LLC with DC-to-DC conversion delivers clean power and reduces coil whine
- ATX form factor 800W unit built for modern desktop builds
Caractéristiques
| Type | ATX |
|---|
Questions sur cet article
What ATX form-factor dimensions and mounting-hole pattern does the PS-2801-4H-LF use for case fit?
The PS-2801-4H-LF follows the standard ATX form factor, so it fits any case designed for ATX power supplies with the usual four-hole mounting pattern.
What is the correct way to connect the 24-pin ATX and CPU power cables, and which step do builders often miss?
Seat the 24-pin motherboard connector and the 4+4-pin CPU connector fully until each latch clicks; the step most often missed is leaving the CPU power cable unplugged or only partially inserted.
Which component will most likely need attention after several years of continuous operation?
The internal cooling fan is the primary wear item; if it becomes noisy or fails to spin under load the unit should be serviced or replaced.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Silverstone Decathlon R Gold 750W ATX 3.0 power supply
Silverstone Technology FA311-B FARA 311 Micro-ATX PC case
- Micro ATX



