Kingston Technology Corp.
Kingston Technology Corp. KCP3L16ND8/8 8GB DDR3L 1600MHz CL11 1.35V desktop RAM
8 GB DDR3L desktop module running at 1600 MHz with CL11 latency and 1.35 V operation
- Capacity8GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- 8 GB capacity boosts multitasking headroom
- 1600 MHz DDR3L speed keeps data flowing
- CL11 latency cuts access delay
- 35 V DDR3L voltage reduces power draw
- 240-pin DIMM fits standard desktop slots
8GB DDR3L 1600MHz module for desktop upgrades
This 8GB DDR3L DIMM runs at 1600MHz with CL11 latency and 1.35V operation. It targets desktop owners who need a single 8GB stick to add capacity or replace a failed module in systems that accept DDR3L memory.
Simple 240-pin installation with common pitfalls
Align the notch on the 240-pin edge connector with the slot key and press firmly until the retention clips click. The most frequent issue is seating the module incompletely, which causes the system to fail POST or recognise only partial capacity.
Verify DDR3L support and voltage before ordering
Check that the motherboard and CPU officially support DDR3L at 1.35V; some older DDR3-only platforms require 1.5V modules and will not boot with this voltage. Confirm the board has a free 240-pin DIMM slot and that the maximum supported speed includes 1600MHz.
Points forts
- 8 GB capacity boosts multitasking headroom
- 1600 MHz DDR3L speed keeps data flowing
- CL11 latency cuts access delay
- 35 V DDR3L voltage reduces power draw
- 240-pin DIMM fits standard desktop slots
Caractéristiques
| Brand | Kingston |
|---|---|
| Model | KCP3L16ND8/8 |
| Capacity | 8GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Poids d’expédition | 0.17 kg |
| Dimensions du colis | 140 × 43 × 8 mm |
Questions sur cet article
How do I verify the module runs at 1600 MHz with CL11 after installation?
Open Task Manager or CPU-Z and confirm the memory tab shows 1600 MHz speed and CL11 latency at 1.35 V.
What comes in the box and do I need anything else to install it?
The box contains the single 8 GB 240-pin DDR3L DIMM; no extra cables or brackets are required.
Which capacity and voltage version should I choose for a standard desktop upgrade?
This 8 GB 1.35 V DDR3L module matches the listed specification; select it if your board supports DDR3L at 1600 MHz.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



