Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green 240-pin DDR3 DIMM with gold contacts and black chips

Kingston Technology Corp.

Kingston Technology Corp. KVR16LR11D4/16HA 16GB DDR3 1600 ECC Registered server RAM

SKU CH-M3CE-3PEYB MPN KVR16LR11D4/16HA

16 GB DDR3 1600 ECC Registered server memory with CL11 latency and 1.35 V operation

  • Capacity16GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection safeguards data integrity in critical servers
  • Registered design reduces electrical load for stable operation
  • 16 GB capacity supports demanding virtualization workloads
  • DDR3 1600 speed delivers 12800 MT/s bandwidth
  • Low 1.35 V voltage cuts power consumption per module

16GB DDR3 ECC Registered module

This 16GB DDR3 module runs at 1600 MT/s with CL11 latency and 1.35 V operation. It uses a 240-pin registered DIMM layout with on-board ECC for data integrity. The component is built with Hynix A-die FBGA chips in a 2G x 72 configuration. It targets administrators who need consistent, validated memory for 24/7 server workloads.

Replaces non-ECC or unbuffered DIMMs

The jump is worthwhile when the platform requires registered signalling and error correction for multi-DIMM channels. Systems that currently run standard unbuffered memory cannot accept this module because the register changes the electrical load. Upgrade only after confirming the motherboard specifies registered ECC support in its qualified vendor list.

Installation is a standard DIMM insertion

Align the notch with the keyed slot and press evenly until the retention clips engage. The most common issue is mixing registered and unbuffered modules in the same channel, which prevents boot. Another frequent problem is exceeding the platform’s maximum rank count per channel, so verify the server’s population rules before adding more sticks.

Points forts

  • ECC protection safeguards data integrity in critical servers
  • Registered design reduces electrical load for stable operation
  • 16 GB capacity supports demanding virtualization workloads
  • DDR3 1600 speed delivers 12800 MT/s bandwidth
  • Low 1.35 V voltage cuts power consumption per module

Caractéristiques

BrandKingston
ModelKVR16LR11D4/16HA
Capacity16GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
FeaturesStandard 2G X 72
FBGA, Gold
w/TS
Poids d’expédition0.04 kg
Dimensions du colis169 × 55 × 14 mm

Questions sur cet article

Does the 240-pin DDR3 form factor fit my server's DIMM slots?

This module uses the standard 240-pin DDR3 SDRAM layout, so it fits any server DIMM slot designed for DDR3 registered memory.

How do I install the module correctly, and what step is often missed?

Align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, and verify the system recognises the full 16 GB at 1600 MT/s.

Will the ECC registered design or the 1.35 V operation require any special maintenance later?

No routine maintenance is needed; ECC correction and registered buffering are handled automatically by the memory controller, and the low-voltage 1.35 V operation runs within standard DDR3 specifications.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.