SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.
Kingston Technology Corp.
8 GB DDR4 2133 ECC unbuffered DIMM with CL15 timing and 1.2 V operation for compatible servers and workstations
This 8 GB DDR4 module runs at 2133 MHz with CL15 timings and 1.20 V operation. It provides ECC error correction in an unbuffered 288‑pin DIMM format. The dual‑rank 2Rx8 organisation suits workstations and entry‑level servers that require data integrity. Kingston ValueRAM branding indicates standard validated reliability.
Buyers needing registered or load‑reduced modules cannot use this stick. Systems limited to non‑ECC memory will not benefit from the error‑correction feature. Builds requiring capacities above 8 GB per slot or speeds beyond 2133 MHz should select different modules.
The combination of unbuffered signalling and on‑die ECC is the decisive attribute for motherboard compatibility. Only boards that explicitly support unbuffered ECC DDR4 at 2133 MHz will POST correctly with this part. Verify the platform memory qualification list before ordering.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR21E15D8/8HA |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Features | Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP - 2.5V Typical VDDSPD = 2.2V to 3.6V Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals Low-power auto self refresh (LPASR) Data bus inversion (DBI) for data bus On-die VREFDQ generation and calibration Dual-rank On-board I2 serial presence-detect (SPD) EEPROM Temperature sensor with integrated SPD 16 internal banks; 4 groups of 4 banks each Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) Selectable BC4 or BL8 on-the-fly (OTF) Fly-by topology Terminated control |
| Poids d’expédition | 0.03 kg |
| Dimensions du colis | 146 × 46 × 8 mm |
The module runs at 2133 MHz, delivering up to PC4 17000 bandwidth for workloads that can use that throughput.
The 288-pin DDR4 connection caps transfer rate at 2133 MHz, so faster CPUs or chipsets cannot push this memory beyond that speed.
It requires a standard 288-pin DDR4 DIMM slot and enough vertical clearance for a module without a heat spreader.
Également dans ce rayon
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Ce que vous envoyez, et ce dans quoi vous lisez les prix.
Envoyé depuis votre portefeuille à la caisse
Affichage seul — le catalogue est libellé en dollars
Aucune monnaie ne correspond.
Choisissez la langue dans laquelle le site vous parle.
Première visite ?
Vous avez déjà un compte ?
Il n’y a pas de réinitialisation automatique : cette boutique n’envoie aucun e-mail, il n’existe donc aucun lien à usage unique à demander. Laissez l’adresse sur le compte, elle sera traitée à la main.
Demande enregistrée
Rien n’arrivera dans votre boîte de réception — cette boutique n’envoie aucun e-mail. Quelqu’un s’en occupe à la main.
Vous l’avez retrouvé ?