Kingston Technology Corp.
Kingston Technology Corp. KVR26N19S8/8 8GB DDR4 2666 CL19 desktop RAM
8GB DDR4 2666 CL19 desktop DIMM runs at 1.2V with 288-pin unbuffered design
- Capacity8GB
- Type288-Pin PC RAM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Timing19-19-19
- Voltage1.20V
- 8GB capacity expands multitasking headroom for everyday workloads
- DDR4 2666 speed delivers responsive data throughput at 2666 MT/s
- CL19 timing with 1.2V operation balances latency and power efficiency
- 288-pin unbuffered DIMM installs directly into standard desktop slots
- 100% factory tested at rated speed ensures reliable out-of-the-box operation
Kingston ValueRAM 8GB DDR4 2666
This single 8GB module targets desktop owners who want a straightforward memory upgrade for everyday computing. It runs at the JEDEC-standard 2666 MT/s with CL19 latency and 1.20V operation. The unbuffered, non-ECC design suits mainstream consumer boards that accept standard DDR4 DIMMs.
Easy installation with DDR4 keying
The 288-pin DIMM uses the DDR4 curved edge to guide insertion and reduce PCB stress. Align the notch, press firmly until the retention clips click, and the system will detect the SPD profile automatically. The only common issue is mixing speeds — the motherboard will downclock all modules to the slowest one present.
Speed decides fit for 2666 MT/s systems
The module is rated at 2666 MT/s (PC4-21300) with 19-19-19 timing. If your platform requires a higher or lower data rate, this stick will not match the specification. Builders who need a different speed grade should select a module rated for that exact frequency.
Points forts
- 8GB capacity expands multitasking headroom for everyday workloads
- DDR4 2666 speed delivers responsive data throughput at 2666 MT/s
- CL19 timing with 1.2V operation balances latency and power efficiency
- 288-pin unbuffered DIMM installs directly into standard desktop slots
- 100% factory tested at rated speed ensures reliable out-of-the-box operation
Caractéristiques
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR26N19S8/8 |
| Capacity | 8GB |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Timing | 19-19-19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Features | This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. |
| Poids d’expédition | 0.03 kg |
| Dimensions du colis | 147 × 47 × 9 mm |
Questions sur cet article
How do I confirm the module is running at DDR4 2666 CL19 after installation?
Open your system BIOS or a tool like CPU-Z and verify the memory tab shows 2666 MHz with 19-19-19 timings at 1.20 V.
What ships with the KVR26N19S8/8 and what must I source separately?
The box contains a single 8 GB 288-pin unbuffered non-ECC DIMM. No heat spreader, cables or additional modules are included.
When should I choose this 8 GB 2666 CL19 stick versus a different capacity or speed?
Pick this module when your board supports DDR4 2666 and you need one 8 GB DIMM at JEDEC 1.2 V without ECC or XMP overclocking.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00356417BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00420131BTC
En stock