Kingston Technology Corp.
Kingston Technology Corp. KVR400/512R desktop RAM 512MB DDR 400 (PC 3200) 184-Pin CL3 2.6V
512 MB DDR 400 desktop memory running at CL3 on 2.6 V with a 184-pin DIMM
- Capacity512MB
- SpeedDDR 400 (PC 3200)
- CAS LatencyCL3
- Voltage2.60V
- ECCNo
- 512 MB capacity supports everyday desktop tasks
- DDR 400 speed rated at PC 3200 bandwidth
- CAS latency 3 delivers responsive memory timing
- 6 V operation matches standard DDR voltage
- 184-pin DIMM fits compatible desktop motherboards
Product Identity
Kingston ValueRAM KVR400/512R is a 512MB 184-pin DDR SDRAM module rated for DDR 400 (PC 3200) with a CAS latency of 3 and a voltage of 2.6V. It is designed for desktop systems that accept this memory standard.
Suitability
This module suits owners of older desktops needing a direct replacement or a capacity increase within the DDR 400 specification. Builders who require ECC error correction, larger individual module capacities, or a different pin count should look elsewhere.
Deciding Specification
The 184-pin DDR interface combined with the 2.6V operating voltage determines whether this module fits the motherboard slots and meets the electrical requirements of the target system.
Points forts
- 512 MB capacity supports everyday desktop tasks
- DDR 400 speed rated at PC 3200 bandwidth
- CAS latency 3 delivers responsive memory timing
- 6 V operation matches standard DDR voltage
- 184-pin DIMM fits compatible desktop motherboards
Caractéristiques
| Capacity | 512MB |
|---|---|
| Speed | DDR 400 (PC 3200) |
| CAS Latency | CL3 |
| Voltage | 2.60V |
| ECC | No |
Questions sur cet article
Does my motherboard need an 184-pin DDR DIMM slot to use this 512MB module?
Yes, the stick is a 184-pin DDR SDRAM DIMM, so the board must provide a matching DDR 400 (PC 3200) slot that can supply 2.6 V.
Will this CL3 2.6 V stick run stably in a system that still uses slower DDR 266 or DDR 333 modules?
The motherboard will clock all installed memory to the lowest common speed and tightest shared timings; mixing with slower DDR modules forces this kit to run at their lower rate.
How can I confirm the module is recognised at its rated DDR 400 CL3 setting after installation?
Enter the BIOS or use a system-information utility and verify the memory shows 512 MB at 400 MHz (PC 3200) with CAS latency 3 and 2.6 V.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



