Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small black PCB with USB-A plug, gold pins and jumper headers

LORDWORLD

LORDWORLD USB to UART Debugger Module for Raspberry Pi 5 Type-A Port

SKU CH-FNFN-VDV06

USB-to-UART debugger for Raspberry Pi 5 with selectable 3.3V or 5V TTL levels, onboard IO protection, and broad OS support

  • Debug Raspberry Pi 5 across Windows 7 through 11, Mac, Linux and Android
  • Hardware IO protection guards against surges and static for stable communication
  • Onboard 3.3 V and 5 V TTL level selection via jumper pins
  • Module draws power from USB and supplies 3.3 V or 5 V output
  • Double-sided black immersion gold finish resists wear and looks professional

Raspberry Pi 5 UART Debugger

The LORDWORLD USB to UART module provides a dedicated serial debugging link for Raspberry Pi 5 boards. It connects through a standard Type-A USB port and is recognised by Windows 7 through 11, macOS, Linux and Android without extra drivers. Developers and hobbyists can access the Pi’s console for boot diagnostics, kernel development or headless configuration.

On-board protection and level selection

Integrated IO protection circuits guard against surge and static events during development sessions. A jumper selects between 3.3 V and 5 V TTL logic levels, matching the target interface without external converters. The module draws power directly from the USB bus, so no separate supply is required for typical debug workloads.

Double-sided immersion-gold PCB

The board uses a double-sided black immersion-gold finish that resists oxidation and withstands repeated connector cycles. This construction keeps the signal path reliable across long-term projects. Buyers who need isolation, higher voltage translation or multi-channel logging should look for a more advanced adapter.

Points forts

  • Debug Raspberry Pi 5 across Windows 7 through 11, Mac, Linux and Android
  • Hardware IO protection guards against surges and static for stable communication
  • Onboard 3.3 V and 5 V TTL level selection via jumper pins
  • Module draws power from USB and supplies 3.3 V or 5 V output
  • Double-sided black immersion gold finish resists wear and looks professional

Caractéristiques

BrandLORDWORLD

Questions sur cet article

How do I connect this debugger module to a Raspberry Pi 5 and set the correct logic level?

Plug the Type-A USB end into the Pi 5, then short the onboard jumper to either the 3.3V or 5V pin to match the Pi's TTL level before powering up.

What on-board component may need attention after long-term use?

The jumper used to select 3.3V or 5V output can wear with repeated changes; keep it seated firmly on the chosen pin to maintain a stable voltage rail.

What limits the maximum baud rate during a continuous debugging session?

The USB-powered supply and the selected 3.3V or 5V TTL level set the practical ceiling for sustained high-speed serial traffic.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.