Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Compact green circuit board with M.2 slot and USB 3.0 connector for Raspberry Pi 5

MCDODO

MCDODO N06 M.2 NVME SSD USB Adapter for Raspberry Pi 5

SKU CH-YX4B-A362Z

Connects M.2 NVMe SSDs (2230, 2242, 2260, 2280) to a Raspberry Pi 5 via USB 3.0 for high-speed storage expansion

  • TypeSingle Board Computers
  • High-speed storage via USB 3.0 bandwidth
  • Plug-and-play operation with no driver installation
  • Supports M.2 NVME SSDs 2230 2242 2260 2280
  • Clean bottom-mount design for tidy Pi 5 setup
  • Single USB 3.0 cable handles power and data

M.2 NVMe SSD USB Adapter for Raspberry Pi 5

This USB 3.0 adapter connects M.2 NVMe solid-state drives in 2230, 2242, 2260 and 2280 sizes to a Raspberry Pi 5. It draws power and transfers data through a single USB 3.0 link. The board mounts on the underside of the Pi 5 for a compact, integrated setup. No drivers or system changes are required for operation.

Makers expanding Pi 5 storage with NVMe drives

Builders who want fast, plug-and-play NVMe storage on a Raspberry Pi 5 will find this adapter suitable. It supports four common M.2 lengths and uses the Pi 5 USB 3.0 port for both power and data. Users needing boot-from-NVMe without USB, PCIe-gen-4 throughput, or compatibility with boards other than the Pi 5 should consider alternative solutions.

Single USB 3.0 connection for power and data

The adapter communicates with the Raspberry Pi 5 over one USB 3.0 interface that supplies power and carries all data traffic. This means performance is bounded by USB 3.0 bandwidth rather than a native PCIe lane. The design prioritises simple installation and broad M.2 NVMe size support over maximum theoretical throughput.

Points forts

  • High-speed storage via USB 3.0 bandwidth
  • Plug-and-play operation with no driver installation
  • Supports M.2 NVME SSDs 2230 2242 2260 2280
  • Clean bottom-mount design for tidy Pi 5 setup
  • Single USB 3.0 cable handles power and data

Caractéristiques

TypeSingle Board Computers

Questions sur cet article

What real-world speed can I expect from the USB 3.0 link when an NVME drive is attached?

The adapter uses a single USB 3.0 connection for both power and data, so throughput is limited to the USB 3.0 bus rather than the drive’s native NVME potential.

Does the USB 3.0 interface also supply enough power for every supported drive size?

Yes, the single USB 3.0 cable carries both power and data, and the board is designed to run 2230, 2242, 2260 and 2280 modules without an external supply.

How does the adapter physically attach to the Raspberry Pi 5?

It mounts on the underside of the Pi 5 board, aligning with the mounting holes for a tidy, integrated fit.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.