Mean Well
Mean Well PS-45-24 45.6W 24V 1.9A power supply
Open-frame AC-DC unit delivers 45.6 W at 24 V and 1.9 A for industrial equipment
- TypeAT
- Delivers stable 24 V output for industrial equipment
- 6 W continuous power handles moderate loads
- 9 A current rating suits typical 24 V circuits
- Open-frame PCB design fits standard enclosures
- 100 % original Mean Well unit verified by serial number
Industrial open-frame AC-DC supply
The Mean Well PS-45-24 is a 45.6 W single-output unit that delivers 24 V at 1.9 A from an AC mains input. It uses an AT-type layout on a bare PCB, making it suitable for integration into custom enclosures, test rigs or OEM equipment where a compact board-level source is required.
Fits board-level builds, not ATX cases
Engineers designing embedded systems, LED drivers or industrial controllers will appreciate the fixed 24 V rail and open-frame form factor. Builders who need a standard ATX connector set, power-factor correction or a cased unit with fan cooling should look elsewhere.
Steady 45.6 W under continuous load
The supply is rated for its full 45.6 W output during sustained operation, not just peak bursts. With no power-factor correction stage, input current waveform remains non-sinusoidal, so installers should verify harmonic limits if the installation falls under applicable regulations.
Points forts
- Delivers stable 24 V output for industrial equipment
- 6 W continuous power handles moderate loads
- 9 A current rating suits typical 24 V circuits
- Open-frame PCB design fits standard enclosures
- 100 % original Mean Well unit verified by serial number
Caractéristiques
| Type | AT |
|---|
Questions sur cet article
What AC input voltage range does the PS-45-24 accept for operation?
The PS-45-24 is an AC-DC switching power supply designed to convert mains alternating current into a regulated 24 V DC output for industrial equipment.
Can the PS-45-24 replace an older 24 V supply that delivered less than 1.9 A?
Yes, the PS-45-24 provides 24 V at up to 1.9 A, so it can power loads that previously drew less current while maintaining the same voltage.
How can I verify the PS-45-24 is delivering the correct 24 V output after wiring it?
Measure the output terminals with a multimeter set to DC volts; a reading close to 24 V confirms the unit is regulating correctly under load.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Silverstone Decathlon R Gold 750W ATX 3.0 power supply
Silverstone Technology FA311-B FARA 311 Micro-ATX PC case
- Micro ATX



