Micron
Micron 7450 PRO MTFDKCC15T3TFR-1BC1ZABYYR 15.36 TB enterprise SSD
15.36 TB enterprise NVMe SSD with U.3 interface, PCIe 4.0 x4 speed and 6800 MB/s reads
- Device TypeInternal / External Solid State Drive (SSD)
- 36 TB capacity supports massive datasets
- PCIe 4.0 x4 NVMe delivers 6800 MB/s reads
- U.3 2.5" form factor fits standard server bays
- 28000 TBW endurance handles heavy write workloads
- 2 million hour MTBF ensures enterprise reliability
15.36 TB enterprise NVMe SSD
The Micron 7450 PRO delivers 15.36 TB of storage in a 2.5-inch U.3 form factor. It connects through a PCIe 4.0 x4 interface using NVMe 1.4 protocol. The drive is built for storage systems and servers that require high-capacity solid-state storage.
Sustained write endurance
Rated at 28000 TB of total bytes written, the SSD is engineered for continuous enterprise workloads rather than burst transfers. A mean time between failures of 2 million device hours supports long-term deployment in always-on environments. The 1.2 V I/O voltage helps maintain stable operation under heavy sustained I/O.
6800 MB/s sequential read ceiling
The maximum read transfer rate of 6800 MB/s sets the performance boundary for read-intensive applications. Workloads demanding higher throughput will need additional drives or a faster interface. This figure determines whether the drive matches the throughput requirements of the target server platform.
Points forts
- 36 TB capacity supports massive datasets
- PCIe 4.0 x4 NVMe delivers 6800 MB/s reads
- U.3 2.5" form factor fits standard server bays
- 28000 TBW endurance handles heavy write workloads
- 2 million hour MTBF ensures enterprise reliability
Caractéristiques
| Brand | Micron |
|---|---|
| Device Type | Internal / External Solid State Drive (SSD) |
| Poids d’expédition | 0.45 kg |
| Dimensions du colis | 25 × 25 × 25 mm |
Questions sur cet article
How much power does the 1.2-volt I/O draw when the 7450 PRO runs continuously in a storage server?
The drive operates at a 1.2-volt I/O voltage, and its NVMe 1.4 interface supports power-state transitions that reduce consumption during idle periods while delivering up to 6800 MB/s under sustained load.
Which server backplane and cabling are required to install this U.3 2.5-inch 15mm SSD?
A U.3-compatible 2.5-inch bay with PCIe 4.0 x4 wiring is needed; the drive plugs directly into the backplane without an adapter and draws power through the same connector.
Will this PCIe 4.0 x4 NVMe drive work in a chassis that only provides PCIe 3.0 x4 slots?
Yes, the NVMe 1.4 interface is backward compatible and will negotiate a PCIe 3.0 x4 link, delivering reduced throughput while retaining the full 15.36 TB capacity and 28000 TB endurance rating.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



