MSI
MSI 3080GamingXTrio10G graphics card
Refurbished GeForce RTX 3080 with 10GB GDDR6X, 8704 CUDA cores, 1815 MHz boost and TRI FROZR 2 triple-fan cooling
- InterfacePCI Express 4.0
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 30 Series
- GPUGeForce RTX 3080
- Boost Clock1815 MHz
- CUDA Cores8704
- 10 GB GDDR6X on a 320-bit bus feeds high-res textures fast
- Boost clock reaches 1815 MHz for strong 4K frame rates
- 8704 CUDA cores accelerate ray-traced workloads
- HDMI 2.1 plus three DisplayPort 1.4a drive four 8K displays
- TRI FROZR 2 cooler with TORX Fan 4.0 keeps thermals in check
Triple-fan RTX 3080 for 4K enthusiasts
This MSI Gaming X Trio card pairs a GeForce RTX 3080 GPU with 10GB of GDDR6X memory on a 320-bit bus. It delivers 8704 CUDA cores and a 1815 MHz boost clock over a PCI Express 4.0 interface. The triple-fan TRI FROZR 2 cooler handles a 340 W thermal design power for sustained high-frame-rate gaming.
Upgrade path from 8 GB cards
Moving from an 8 GB model unlocks the 10 GB frame buffer needed for 4K texture packs and heavy creative workloads. The 19 Gbps memory speed and 320-bit width remove bandwidth bottlenecks that appear at 7680 x 4320 resolution. The jump is worth it when your current card hits VRAM limits before GPU limits.
Build requirements and clearance
A 750 W power supply and three 8-pin connectors are required to feed the 340 W board. The card occupies three slots and needs a case with enough length for the triple-fan shroud. One HDMI 2.1 and three DisplayPort 1.4a outputs drive four monitors at up to 7680 x 4320 without adapters.
Points forts
- 10 GB GDDR6X on a 320-bit bus feeds high-res textures fast
- Boost clock reaches 1815 MHz for strong 4K frame rates
- 8704 CUDA cores accelerate ray-traced workloads
- HDMI 2.1 plus three DisplayPort 1.4a drive four 8K displays
- TRI FROZR 2 cooler with TORX Fan 4.0 keeps thermals in check
Caractéristiques
| Brand | MSI |
|---|---|
| Series | Gaming |
| Model | RTX 3080 GAMING X TRIO 10G |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3080 |
| Boost Clock | 1815 MHz |
| CUDA Cores | 8704 |
| Effective Memory Clock | 19 Gbps |
| Memory Size | 10GB |
| Memory Interface | 320-Bit |
| Memory Type | GDDR6X |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Thermal Design Power | 340W |
| System Requirements | Recommended PSU: 750W |
| Recommended PSU Wattage | 750W |
| Power Connector | 3 x 8-Pin |
| HDCP Ready | Yes |
| Features | TRI FROZR 2 Thermal Design TORX Fan 4.0: A masterpiece of teamwork, fan blades work in pairs to create unprecedented levels of focused air pressure. Core Pipe: Precision-crafted heat pipes ensure max contact to the GPU and spread heat along the full length of the heatsink. Airflow Control: Don't sweat it, Airflow Control guides the air to exactly where it needs to be for maximum cooling. RGB Mystic Light Mystic Light gives you complete control of the RGB lighting for MSI devices and compatible RGB products. Dragon Center MSI's exclusive Dragon Center software lets you monitor, tweak |
| Max GPU Length | 323 mm |
| Card Dimensions (L x H) | 12.72" x 5.51" |
| Poids d’expédition | 1.81 kg |
| Dimensions du colis | 401 × 259 × 84 mm |
Questions sur cet article
Will the triple-slot TRI FROZR 2 cooler and three 8-pin power connectors fit my case and PSU?
The card uses a triple-fan TRI FROZR 2 design that occupies three expansion slots and draws power through three 8-pin connectors; verify your chassis clearance and that your 750W supply has three dedicated 8-pin leads.
Do I plug all three 8-pin cables in at once, or can I daisy-chain one cable?
Connect three separate 8-pin cables from the PSU to the card; daisy-chaining a single cable cannot deliver the 340W TDP safely.
How often should I clean the TORX Fan 4.0 blades and re-paste the Core Pipe heatsink?
Blow dust from the three fans and heatsink fins every six to twelve months; thermal paste on the GPU core typically lasts several years before re-application is needed.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



