MSI
MSI RTX 4070 Ti VENTUS 2X 12G OC graphics card
A 12GB GDDR6X GPU with 7680 CUDA cores, a 2640 MHz boost clock and dual-fan cooling for 1440p and 4K gaming
- InterfacePCI Express 4.0 x16
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 40 Series
- GPUGeForce RTX 4070 Ti
- Boost Clock2640 MHz
- CUDA Cores7680
- 12 GB GDDR6X memory handles high-resolution textures
- Boost clock reaches 2640 MHz for strong compute performance
- 7680 CUDA cores accelerate parallel workloads
- Dual-fan cooler keeps thermals in check
- HDMI 2.1a plus three DisplayPort 1.4a outputs drive four displays
12GB GDDR6X graphics card
The MSI RTX 4070 Ti VENTUS 2X 12G OC is a PCI Express 4.0 x16 add-in board built around the GeForce RTX 4070 Ti GPU. It delivers 7680 CUDA cores, a 2640 MHz boost clock and 12GB of GDDR6X memory on a 192-bit bus running at 21 Gbps. The card targets 1440p and entry 4K gaming as well as GPU-accelerated creative workloads.
Upgrade from 8GB or 10GB mid-range cards
Moving from an 8GB or 10GB model adds the 12GB frame buffer and the 192-bit GDDR6X interface, which together remove texture-streaming stalls at higher resolutions. The 2640 MHz boost clock and 7680 CUDA cores lift compute throughput enough to justify the step when current hardware hits VRAM limits or frame-time spikes in modern titles. The jump is worth it once your monitor resolution or asset quality exceeds the prior card’s memory capacity.
Dual-fan ATX design with 16-pin power
The 242 mm ATX form factor fits most mid-tower cases and leaves room for front-panel airflow. A single 16-pin connector draws up to 285 W, so a 700 W power supply is recommended. Outputs comprise one HDMI 2.1a and three DisplayPort 1.4a ports, supporting up to four displays at 7680 x 4320 resolution. The dual-fan cooler exhausts heat into the case, making positive case pressure helpful.
Points forts
- 12 GB GDDR6X memory handles high-resolution textures
- Boost clock reaches 2640 MHz for strong compute performance
- 7680 CUDA cores accelerate parallel workloads
- Dual-fan cooler keeps thermals in check
- HDMI 2.1a plus three DisplayPort 1.4a outputs drive four displays
Caractéristiques
| Brand | MSI |
|---|---|
| Series | Ventus |
| Model | RTX 4070 Ti VENTUS 2X 12G OC |
| Interface | PCI Express 4.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 40 Series |
| GPU | GeForce RTX 4070 Ti |
| Boost Clock | 2640 MHz |
| CUDA Cores | 7680 |
| Effective Memory Clock | 21000 MHz (21 Gbps) |
| Memory Size | 12GB |
| Memory Interface | 192-Bit |
| Memory Type | GDDR6X |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1a |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| Cooler | Double Fans |
| Thermal Design Power | 285W |
| Recommended PSU Wattage | 700W |
| Power Connector | 1 x 16-Pin |
| Form Factor | ATX |
| Max GPU Length | 242 mm |
| Poids d’expédition | 1.23 kg |
| Dimensions du colis | 318 × 216 × 99 mm |
Questions sur cet article
Will the 242 mm length and 16-Pin power connector fit my ATX case and PSU?
The card measures 242 mm long and uses a single 16-Pin connector, so verify your case clearance and PSU cable before installing.
What is the correct way to seat the PCI Express 4.0 x16 card and attach the 16-Pin power cable?
Insert the card fully until the bracket clicks, then push the 16-Pin connector in until it locks; the common error is leaving the power cable partially seated.
How often should I clean the Double Fans cooler on this 285W TDP card?
Remove dust from the two fans and heatsink every three to six months to maintain airflow for the 285W thermal design.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355371BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418898BTC
En stock