Micron Technology, Inc. 2GB DDR3 1600 ECC NON-REG 1RX8 1.35V desktop RAM
- 2GB
- DDR3 1600 (PC3 1280…
Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.
myVolts
Converts 100-120V or 200-240V AC to 12V, 24V, 36V or 48V DC at up to 1500W with short-circuit, overload and over-voltage protection
This 1500W switching supply converts 100-120VAC or 200-240VAC input into selectable 12V, 24V, 36V or 48V DC output. It delivers up to 125A at 12V for test benches, LED installations or industrial equipment requiring regulated DC power. Professional installation by a qualified electrician is strongly recommended because no wiring cables, switch or mounting screws are included. The unit suits users who need a single high-current rail with adjustable voltage trim.
Rated efficiency reaches 0.85 at 230VAC input and 25°C ambient. Protections cover short circuit, overload above 110-150 percent of rated power and over-voltage, with auto recovery once the fault clears. A full-load burn-in test of 1100 cycles is performed at the factory. Operating range spans -20°C to +60°C at 20-90 percent relative humidity. The aluminium shell weighs 1850g and measures 240x125x75mm for passive heat dissipation.
No cables, on/off switch, screws or printed instructions ship with the unit. Buyers must supply appropriately rated conductors, a suitable enclosure and an input selector set to the local mains voltage before energising. The +V ADJ trimmer allows fine output adjustment but provides no remote-sense or digital control. Users requiring plug-and-play connectivity or bundled mounting hardware should consider a different form factor.
| Type | AT |
|---|
Connect L to live, N to neutral, +V to positive DC and -V to negative DC; the step most people get wrong is forgetting to set the 100-120VAC or 200-240VAC selector before applying power.
No user-serviceable parts inside; keep the ventilation slots clear and operate between -20°C and +60°C so the 85% efficiency design can run at full load without thermal shutdown.
Overload protection activates above 110% of rated power, shutting down the output until the fault is removed and the unit auto-recovers.
Également dans ce rayon
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Ce que vous envoyez, et ce dans quoi vous lisez les prix.
Envoyé depuis votre portefeuille à la caisse
Affichage seul — le catalogue est libellé en dollars
Aucune monnaie ne correspond.
Choisissez la langue dans laquelle le site vous parle.
Première visite ?
Vous avez déjà un compte ?
Il n’y a pas de réinitialisation automatique : cette boutique n’envoie aucun e-mail, il n’existe donc aucun lien à usage unique à demander. Laissez l’adresse sur le compte, elle sera traitée à la main.
Demande enregistrée
Rien n’arrivera dans votre boîte de réception — cette boutique n’envoie aucun e-mail. Quelqu’un s’en occupe à la main.
Vous l’avez retrouvé ?