myVolts
myVolts ATX-250W 250W ATX power supply
A 250 W ATX power supply with manual 115/230 V switching, automatic fan control and a 1.1 m power cord
- TypeAT
- Quick installation with clearly marked connectors
- Low energy draw suits basic desktop builds
- Manual 115/230V switch for flexible voltage use
- Thermal sensor adjusts fan speed automatically
- 1 metre power cord included for daily needs
250W ATX desktop power supply
The myVolts ATX-250W delivers 250 watts of continuous power for basic desktop computers. It targets office PCs and simple workstations that do not require high-output graphics cards or multiple drives. The unit includes a 1.1 metre mains cord and a manually selectable 115/230 volt input switch for worldwide use.
20+4 pin motherboard and 4 pin CPU connectors
The power supply provides a 20+4 pin ATX connector for the motherboard and a dedicated 4 pin 12 volt CPU connector. These two interfaces decide whether the unit fits your board; it lacks an 8 pin EPS connector and PCIe 8 pin graphics connectors. Builders needing those connections must choose a different model.
Labelled cables and automatic fan control
Clearly marked connectors make cable routing straightforward for first-time builders. A thermal sensor adjusts the 12 centimetre fan speed automatically, keeping noise low under light loads. The supply has no active PFC and only two SATA power plugs, so systems with many drives or modern high-efficiency requirements may find it limiting.
Points forts
- Quick installation with clearly marked connectors
- Low energy draw suits basic desktop builds
- Manual 115/230V switch for flexible voltage use
- Thermal sensor adjusts fan speed automatically
- 1 metre power cord included for daily needs
Caractéristiques
| Type | AT |
|---|
Questions sur cet article
Will the 250W rating cover a basic office PC with integrated graphics?
The 250W rating is designed for low energy consumption, low noise basic desktop systems and should cover typical office builds with integrated graphics.
Does the manual 115/230V switch limit efficiency or require user action?
The unit uses a manual 115/230V switch with no active PFC; you must set it to match your mains voltage and efficiency is rated above 80%.
Will the 140 x 150 x 86mm case fit a standard ATX chassis?
The dimensions of 140 x 150 x 86mm match the standard ATX form factor and the 12cm fan aligns with typical mounting points.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



