myVolts
myVolts DPS605U Adjustable DC Power Supply 60V 5A 300W
Adjustable bench-top DC supply delivering 0-60V and 0-5A up to 300W with four-digit LED readout, USB fast-charge port and full protection suite
- TypeAT
- Four-digit display shows voltage, current and power at a glance
- USB fast-charge port recognises multiple protocols for phones and laptops
- Adjustable output from 0 to 60 V and 0 to 5 A with fine and coarse controls
- Over-voltage, over-current and over-heat protection plus short-circuit alarm
- Suitable for phone repair, computer service, lab work and production lines
Adjustable 0-60V 0-5A output
This bench-top unit delivers continuously adjustable DC voltage from 0 to 60 V and current from 0 to 5 A, up to 300 W. A four-digit LED display shows voltage, current and power simultaneously. It accepts either 115 V or 230 V AC input via a rear selector switch. The aluminium-alloy enclosure is built for bench use in repair and test environments.
Suited for phone, PC and lab repair.
Technicians servicing phones, computers or general electronics will find the range useful for board-level work and component testing. The USB fast-charge port adds convenience for mobile-device power checks. Builders who need more than 5 A or more than 60 V for larger systems should look at a higher-rated supply.
300 W maximum output power
The 300 W ceiling is the single figure that decides whether this unit can handle a given load. Any device or circuit drawing more than 300 W will exceed the supply’s rating and require a different solution.
Points forts
- Four-digit display shows voltage, current and power at a glance
- USB fast-charge port recognises multiple protocols for phones and laptops
- Adjustable output from 0 to 60 V and 0 to 5 A with fine and coarse controls
- Over-voltage, over-current and over-heat protection plus short-circuit alarm
- Suitable for phone repair, computer service, lab work and production lines
Caractéristiques
| Type | AT |
|---|
Questions sur cet article
What is the maximum output voltage and current this supply can deliver?
The DPS605U adjusts from 0 to 60V and 0 to 5A, giving a 300W maximum output.
What input voltage switch positions are on the rear of the unit?
A rear switch selects either 115V or 230V AC input, each with a ±10% tolerance.
How do the coarse and fine adjustment knobs work together when setting voltage?
Use the coarse knob to approach the target, then the fine knob for precise 0-60V setting; the 4-digit display shows the result.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



