Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green DDR4 SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR4 2133 CL15 SODIMM POSIFLEX RT-5015

SKU CH-V5KW-TH3VB

A 16 GB DDR4 SODIMM kit (2 × 8 GB) rated at 2133 MT/s CL15 for the POSIFLEX RT-5015 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking on the POSIFLEX RT-5015 terminal
  • DDR4 2133 MHz PC4-17000 CL15 delivers responsive performance for point-of-sale workloads
  • Low 1.2 V operation reduces power draw and heat in compact kiosk enclosures
  • 260-pin SODIMM form factor installs directly into the terminal without adapters
  • Rigorously stress-tested modules built with major OEM chips ensure long-term reliability

POSIFLEX RT-5015 DDR4 SODIMM kit

This 16 GB kit contains two 8 GB DDR4 2133 SODIMM modules built for the POSIFLEX RT-5015 terminal. Each stick runs at 1.2 V with CL15 latency and uses a 260-pin unbuffered non-ECC layout. The dual-rank 2Rx8 organisation matches the platform’s memory controller.

Upgrade from 8 GB or slower DDR4

Replacing a single 8 GB module or a lower-speed DDR4 kit adds capacity and bandwidth for point-of-sale workloads. The jump is worthwhile when the terminal runs multiple applications or larger databases that exceed the original memory limit. No benefit appears if the system already has 16 GB of matched DDR4 2133 memory.

Tool-free slot access on the terminal

The RT-5015 exposes SODIMM slots behind a service panel so installation takes minutes with no tools. Align the notch, press firmly until the latches click, then verify the new total in BIOS. The most common issue is inserting a module at an angle, which leaves a pin unseated and prevents boot.

Points forts

  • 16 GB dual-channel kit boosts multitasking on the POSIFLEX RT-5015 terminal
  • DDR4 2133 MHz PC4-17000 CL15 delivers responsive performance for point-of-sale workloads
  • Low 1.2 V operation reduces power draw and heat in compact kiosk enclosures
  • 260-pin SODIMM form factor installs directly into the terminal without adapters
  • Rigorously stress-tested modules built with major OEM chips ensure long-term reliability

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions sur cet article

Does the 260-pin SODIMM form factor match the memory slots in the POSIFLEX RT-5015 terminal?

Yes, this kit uses the standard 260-pin DDR4 SODIMM layout required by the POSIFLEX RT-5015, so each 8 GB module seats directly into the terminal's two memory sockets.

What is the correct orientation step when inserting the modules into the RT-5015, and what mistake do installers often make?

Align the notch on the module's gold edge with the key in the slot, press firmly until the side clips click; the common error is stopping before the clips engage, leaving the module partially seated.

Will the memory require any firmware updates or periodic replacement after installation in the POSIFLEX RT-5015?

No firmware update is needed; the JEDEC-standard 2133 MT/s CL15 1.2 V modules run at rated speed on first boot and have no wear-out mechanism, so they remain in service for the terminal's lifetime.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.